Covalently Integrated MXene–Fluorinated Polymer Electrolytes for 714 Wh Kg −1 Lithium–Metal Batteries
Advanced Materials · 13.11.2026
DOI: 10.1002/adma.75721 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 13.11.2026. Verfasst von Xingchen Song und 14 weiteren Autor:innen. Beteiligte Einrichtung: The Centre of Nanoscale Science and Technology and Key Laboratory of Functional Polymer Materials, Institute of Polymer Chemistry, College of Chemist…. Die Arbeit nennt 58 Literaturangaben. Gefördert von: Beijing-Tianjin-Hebei Basic Research Cooperation, Natural Science Foundation of Tianjin, National Natural Science Foundation of China.
Abstract (Originalsprache)
Polymer electrolytes are promising for high‐energy and safe lithium–metal batteries yet limited by inadequate mechanical integrity, sluggish Li + transport, and unstable electrode–electrolyte interfaces. Here, we report a covalently integrated MXene–fluorinated gel polymer electrolyte (MF‐GPE) through in situ polymerization. Acrylate‐grafted MXene nanosheets act as chemically anchored crosslinkers within a fluorinated polymer network, distinguishing from conventional physically blended composites. The covalent framework not only mechanically reinforces the polymer matrix but also regulates Li + solvation structure and lowers the activation energy for Li + transport. Consequently, the MF‐GPE enables uniform lithium deposition and constructs robust, inorganic‐rich interphases on both lithium–metal anodes and high‐voltage cathodes. It delivers an ionic conductivity of 3.3 mS cm −1 at 25°C and supports stable cycling of LiNi 0.8 Co 0.1 Mn 0.1 O 2 , LiCoO 2 and LiNi 0.5 Mn 1.5 O 4 cathodes at cut‐off voltages up to 4.9 V. Notably, a MF‐GPE based Li||LiCoO 2 pouch cell achieves cell‐level energy densities of 713.9 Wh kg −1 at 4.8 V and 605.2 Wh kg −1 at 4.6 V, maintaining stable operation over 60 cycles, while 18650 cylindrical cells operate stably for 500 cycles. Ah‐class pouch cells demonstrate outstanding safety under nail‐penetration and overcharge tests. These findings establish covalent MXene‐polymer integration to couple ion solvation structure and interphase stabilization for high‐energy, abuse‐tolerant lithium–metal batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- The Centre of Nanoscale Science and Technology and Key Laboratory of Functional Polymer Materials, Institute of Polymer Chemistry, College of Chemistry, Nankai University, Tianjin, China.
- Renewable Energy Conversion and Storage Center (RECAST), Nankai University, Tianjin, China.
- Frontiers Science Center For New Organic Matter, Nankai University, Tianjin, China.
- Tianjin Plannano Technology Company Limited, Tianjin, China.
- School of Chemistry and Materials Science, Langfang Normal University, Langfang, China.
- School of Materials Science and Engineering National Institute for Advanced Materials, Nankai University, Tianjin, China.
ORCID-Profile: Xinyi Ji, Jiajie Liang, Hongtao Zhang, Yongsheng Chen
Förderung
- Beijing-Tianjin-Hebei Basic Research Cooperation
- Natural Science Foundation of Tianjin
- National Natural Science Foundation of China
- Natural Science Foundation of Tianjin Municipality
Zitieren
APA
Song, X., Xu, N., Bian, P., Li, Y., Lou, G., Sun, G., Zhang, J., Li, A., Lu, Y., Li, C., Ji, X., Liang, J., Li, Y., Zhang, H., & Chen, Y. (2026). Covalently Integrated MXene–Fluorinated Polymer Electrolytes for 714 Wh Kg −1 Lithium–Metal Batteries. Advanced Materials. https://doi.org/10.1002/adma.75721
Vancouver
Song X, Xu N, Bian P, Li Y, Lou G, Sun G, et al. Covalently Integrated MXene–Fluorinated Polymer Electrolytes for 714 Wh Kg −1 Lithium–Metal Batteries. Advanced Materials. 2026. doi:10.1002/adma.75721
BibTeX
@article{Song2026,
author = {Song, Xingchen and Xu, Nuo and Bian, Peiran and Li, Yuhu and Lou, Genglin and Sun, Guolin and Zhang, Jinping and Li, Aihong and Lu, Yanhong and Li, Chenxi and Ji, Xinyi and Liang, Jiajie and Li, Yong and Zhang, Hongtao and Chen, Yongsheng},
title = {Covalently Integrated MXene–Fluorinated Polymer Electrolytes for 714 Wh Kg −1 Lithium–Metal Batteries},
journal = {Advanced Materials},
year = {2026},
doi = {10.1002/adma.75721}
}
EUVIMED