Molecular Bridging Flexibility Enables Closed‐Pore Engineering in Hard Carbon for Enhanced Plateau Sodium Storage
Advanced Materials · 13.11.2026
DOI: 10.1002/adma.75718 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 13.11.2026. Verfasst von Ying Zhao und 12 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemical Resource Engineering, Beijing Key Laboratory of Electrochemical Process and Technology for Materials Technology, Nat…. Die Arbeit nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Closed pores are critical structural motifs that enable low‐voltage plateau capacity in hard carbon (HC) anodes for sodium‐ion batteries, yet their controllable construction through precursor molecular design remains challenging. Herein, we demonstrate molecular bridging flexibility as an effective design principle for regulating closed‐pore formation in HCs. The flexibility/rigidity of polymer precursors is tailored by distinct bridging configurations, namely Ar─CH 2 ─Ar and Ar─O─C bridges, where oxygen‐containing bridges enhance segmental flexibility. During early‐stage pyrolysis, flexible precursor segments provide higher conformational freedom, inducing curved carbon skeletons and promoting the formation of semi‐open sub‐1 nm pores. Driven by high surface energy, these semi‐open pores undergo pore‐mouth closure during high‐temperature pyrolysis, generating abundant closed pores. The resulting HC exhibits a closed porosity of 0.12 cm 3 g −1 and a pore size 1.13 nm, which enhances plateau capacity and sodium‐ion diffusion kinetics. Consequently, the flexible‐precursor‐derived HC delivers a high reversible capacity of 356.1 mAh g −1 and a plateau capacity of 242.7 mAh g −1 . Moreover, a practical 1.2 Ah pouch cell achieves 217.2 Wh kg −1 and retains 81.2% of its initial capacity after 100 cycles at 0.5 C. This work establishes a molecular‐level strategy for closed‐pore engineering in HC anodes for high‐performance sodium‐ion batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Chemical Resource Engineering, Beijing Key Laboratory of Electrochemical Process and Technology for Materials Technology, National Engineering Research Center for Fuel Cell and Hydrogen Source, B…
- Nanomaterials Centre, Australia Institute for Bioengineering and Nanotechnology (AIBN) & School of Chemical Engineering, The University of Queensland, Brisbane, Queensland, Australia.
- College of Chemistry and Chemical Engineering, Tarim University, Alar, Xinjiang, P. R. China.
- Department of Material Science and Engineering, College of Design and Engineering, National University of Singapore, Singapore, Singapore.
- Department of Applied Biology and Chemical Technology, Faculty of Science, The Hong Kong Polytechnic University, Hong Kong, P.R. China.
ORCID-Profile: Shengyong Gao, Yibo Zhu, Hui Ying Yang, Lianzhou Wang, Bin Luo, Jisheng Zhou
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhao, Y., Qiu, C., Gao, S., Zhu, Y., Fang, K., Niu, H., Liu, P., Yang, L., Chen, Y., Yang, H. Y., Wang, L., Luo, B., & Zhou, J. (2026). Molecular Bridging Flexibility Enables Closed‐Pore Engineering in Hard Carbon for Enhanced Plateau Sodium Storage. Advanced Materials. https://doi.org/10.1002/adma.75718
Vancouver
Zhao Y, Qiu C, Gao S, Zhu Y, Fang K, Niu H, et al. Molecular Bridging Flexibility Enables Closed‐Pore Engineering in Hard Carbon for Enhanced Plateau Sodium Storage. Advanced Materials. 2026. doi:10.1002/adma.75718
BibTeX
@article{Zhao2026,
author = {Zhao, Ying and Qiu, Chuang and Gao, Shengyong and Zhu, Yibo and Fang, Kuan and Niu, Heping and Liu, Peng and Yang, Liting and Chen, Yahui and Yang, Hui Ying and Wang, Lianzhou and Luo, Bin and Zhou, Jisheng},
title = {Molecular Bridging Flexibility Enables Closed‐Pore Engineering in Hard Carbon for Enhanced Plateau Sodium Storage},
journal = {Advanced Materials},
year = {2026},
doi = {10.1002/adma.75718}
}
EUVIMED