EUVIMEDEUVIMED entdecken
Crossref

Ultra‐Stable Phosphide Barrier Layer for Thermoelectric Bismuth Telluride

Junfeng Chen, Zhiyuan Yu iD, Jianbo Zhu iD, Haijun Wu iD, Yuxin Sun iD, Zijian Zhang iD, Jiayue Du, Kuai Yu, Xian Tang, Wei Cai, Zihang Liu iD, Fengkai Guo iD und 1 weitere

Advanced Materials · 14.11.2026

DOI: 10.1002/adma.75713 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 14.11.2026. Verfasst von Junfeng Chen und 12 weiteren Autor:innen. Beteiligte Einrichtung: National Key Laboratory of Precision Hot Forming, Harbin Institute of Technology, Harbin, China. Die Arbeit nennt 47 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Stable-Support Program of the China Institute of Atomic Energy, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The long‐term reliability of bismuth telluride (BT) thermoelectric power generation devices is severely constrained by the lack of reliable barrier layers. In this work, Ni 2 P is proposed as an ultra‐stable barrier layer for N‐type BT (N–BT). The low thermodynamic driving force for interfacial reaction and the sluggish Ni migration in Ni 2 P together ensure the favorable chemical inertness of the Ni 2 P/N–BT interface, while atomic‐scale bonding endows the interface with high bonding energy, leading to the lowest interfacial contact resistivity (∼1 µΩ cm 2 ), highest bonding strength (∼20 MPa), and longest verified stable duration at 523 K (90 days) among reported barrier layer systems. The resulting seven‐pair BT thermoelectric device achieves a maximum energy conversion efficiency of 6.9% at a temperature difference of 230 K. This work not only addresses the long‐standing bottleneck in power generation applications of BT‐based devices since the 1950s, but also provides guidance for barrier layer design in other thermoelectric systems.

Schlagwörter

Stichwörter der Autor:innen

barrier layerbismuth telluridemetal phosphidesthermoelectric

Autor:innen und Institutionen

  • National Key Laboratory of Precision Hot Forming, Harbin Institute of Technology, Harbin, China.
  • State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an, China.
  • Department of Mechanical Engineering, University of Hong Kong, Hong Kong SAR, China.
  • Department of Nuclear Technology and Application, China Institute of Atomic Energy, Beijing, China.
  • State Key Laboratory of Precision Welding & Joining of Materials and Structures, Harbin Institute of Technology, Harbin, China.

ORCID-Profile: Zhiyuan Yu, Jianbo Zhu, Haijun Wu, Yuxin Sun, Zijian Zhang, Zihang Liu, Fengkai Guo, Jiehe Sui

Förderung

  • National Natural Science Foundation of China
  • Stable-Support Program of the China Institute of Atomic Energy
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Chen, J., Yu, Z., Zhu, J., Wu, H., Sun, Y., Zhang, Z., Du, J., Yu, K., Tang, X., Cai, W., Liu, Z., Guo, F., & Sui, J. (2026). Ultra‐Stable Phosphide Barrier Layer for Thermoelectric Bismuth Telluride. Advanced Materials. https://doi.org/10.1002/adma.75713

Vancouver

Chen J, Yu Z, Zhu J, Wu H, Sun Y, Zhang Z, et al. Ultra‐Stable Phosphide Barrier Layer for Thermoelectric Bismuth Telluride. Advanced Materials. 2026. doi:10.1002/adma.75713

BibTeX
@article{Chen2026,
  author = {Chen, Junfeng and Yu, Zhiyuan and Zhu, Jianbo and Wu, Haijun and Sun, Yuxin and Zhang, Zijian and Du, Jiayue and Yu, Kuai and Tang, Xian and Cai, Wei and Liu, Zihang and Guo, Fengkai and Sui, Jiehe},
  title = {Ultra‐Stable Phosphide Barrier Layer for Thermoelectric Bismuth Telluride},
  journal = {Advanced Materials},
  year = {2026},
  doi = {10.1002/adma.75713}
}
Kostenlos starten →