EUVIMEDEUVIMED entdecken
Crossref

Oxygen Anchoring Enabled by Ce‐Based Pyrochlore Coating for Robust Lithium‐Ion Battery Cathodes

Shijian Luo, Chenchen Song, Huiling Zhao, Peng Lv iD, Wei Kong Pang iD, Zhenxiang Cheng iD, Ying Bai iD

Advanced Materials · 18.11.2026

DOI: 10.1002/adma.75701 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 18.11.2026. Verfasst von Shijian Luo und 6 weiteren Autor:innen. Beteiligte Einrichtung: Henan Key Laboratory of High Efficiency Energy Conversion Science and Technology, Henan International Joint Laboratory of New Energy Materials and De…. Die Arbeit nennt 58 Literaturangaben. Gefördert von: fundRefName="National Natural Science Foundation of China" funderDoi="10.13039/501100001809">National Natural Science Foundation of China, Key Project of National Natural Science Foundation of China, Henan Province Major Science and Technology Special Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nickel‐rich layered oxides (≥ 80% Ni) are pivotal cathode materials for next‐generation high‐energy lithium‐ion batteries. However, under high cutoff voltage, the over‐oxidation of active cations and oxygen anions triggers structural instability and the continuous migration of O n− (0 < n < 2) radicals, rapidly leading to oxygen release, transition metal (TM) dissolution, electrolyte decomposition, and consequently severe degradation of electrochemical performance. Herein, a two‐pronged strategy is proposed to enhance the redox reversibility of lattice oxygen and suppress oxygen release from LiNi 0.84 Co 0.08 Mn 0.08 O 2 (NCM) during cycling. Combining a Ce‐based pyrochlore coating that possesses a high oxygen storage capacity with bulk Ce doping that modulates the TM─O bonds, the modified NCM cathode exhibits exceptional cycling stability under harsh operating conditions. The assembled CR2032 cells achieved 72.2% capacity retention after 400 cycles at 1 C under a high cutoff voltage of 4.50 V at 60°C. Moreover, pouch‐type full cells exhibit ultra‐stable cycling performance, retaining 91.0% capacity after 1000 cycles at 1 C within 2.75–4.20 V, and 80.2% after 1000 cycles when the upper cutoff voltage is raised to 4.40 V. This work not only provides a feasible two‐pronged modification strategy for layered oxide cathodes but also promotes the development of ultrahigh‐energy‐density rechargeable batteries.

Schlagwörter

Stichwörter der Autor:innen

cathode–electrolyte interphasecycling stabilityhigh‐voltage operationlayered oxidesoxygen release

Autor:innen und Institutionen

  • Henan Key Laboratory of High Efficiency Energy Conversion Science and Technology, Henan International Joint Laboratory of New Energy Materials and Devices, School of Physics and Electronics, Henan University, Kaifeng, C…
  • Institute For Superconducting & Electronic Materials, University of Wollongong, Wollongong, NSW, Australia.

ORCID-Profile: Peng Lv, Wei Kong Pang, Zhenxiang Cheng, Ying Bai

Förderung

  • fundRefName="National Natural Science Foundation of China" funderDoi="10.13039/501100001809">National Natural Science Foundation of China
  • Key Project of National Natural Science Foundation of China
  • Henan Province Major Science and Technology Special Project
  • Natural Science Foundation of Henan Province in China
  • Henan Overseas Expertise Introduction Center for Discipline Innovation
  • Joint Fund of Science and Technology R&D Program of Henan Province

Zitieren

APA

Luo, S., Song, C., Zhao, H., Lv, P., Pang, W. K., Cheng, Z., & Bai, Y. (2026). Oxygen Anchoring Enabled by Ce‐Based Pyrochlore Coating for Robust Lithium‐Ion Battery Cathodes. Advanced Materials. https://doi.org/10.1002/adma.75701

Vancouver

Luo S, Song C, Zhao H, Lv P, Pang WK, Cheng Z, et al. Oxygen Anchoring Enabled by Ce‐Based Pyrochlore Coating for Robust Lithium‐Ion Battery Cathodes. Advanced Materials. 2026. doi:10.1002/adma.75701

BibTeX
@article{Luo2026,
  author = {Luo, Shijian and Song, Chenchen and Zhao, Huiling and Lv, Peng and Pang, Wei Kong and Cheng, Zhenxiang and Bai, Ying},
  title = {Oxygen Anchoring Enabled by Ce‐Based Pyrochlore Coating for Robust Lithium‐Ion Battery Cathodes},
  journal = {Advanced Materials},
  year = {2026},
  doi = {10.1002/adma.75701}
}
Kostenlos starten →