EUVIMEDEUVIMED entdecken
Crossref

Attribution Fingerprinting by Interpretable Machine Learning Reveals Category‐Specific Additive Design Rules for Zinc Anodes

Guolang Zhou iD, Minmeng Tang iD, Xinwang Xu, Xin Tang, Tianshi Wang, Chong Zhao, Chao Tang, Cheng Liu, Tengfei Miao, Le Xu, Yubo Yan, Zhendong Yu iD und 4 weitere

Advanced Materials · 02.11.2026

DOI: 10.1002/adma.75609 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 02.11.2026. Verfasst von Guolang Zhou und 15 weiteren Autor:innen. Beteiligte Einrichtung: Jiangsu Key Laboratory for the Chemistry of Low-Dimensional Materials, School of Chemistry and Chemical Engineering, Huaiyin Normal University, Huai'…. Die Arbeit nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Science Foundation for Distinguished Young Scholars, Natural Science Foundation of Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrolyte additives are one of the most direct remedy for interfacial instability in aqueous zinc‐ion batteries, yet their development remains empirical. Existing machine‐learning (ML) screening strategies presume a single global structure‐property relationship shared by all additives. Here, an interpretable ML framework predicts cycle life from molecular descriptors and test conditions, and molecule‐specific SHapley Additive exPlanations (SHAP) profiles serve as attribution fingerprints. Unsupervised clustering resolves the additives into three attribution‐based categories, governed respectively by adsorption energetics, charge‐transfer gap and hydrogen‐bond‐network regulation, indicating that one universal descriptor set may not hold across chemically distinct additives. Representative additives from each category, none present in the training set, agree with experiment to within 11%. Category I screening identifies 2‐fluoropyridine‐5‐carbaldehyde (2FPD), predicted at 3218 h, and Zn//Zn cells deliver 3010 h at 1 mA cm −2 and 1 mAh cm −2 , within 6.5% of prediction. Structural controls trace the improvement to the aldehyde: retaining it alone gives 900 h against an 89 h baseline, whereas fluorine alone gives 90 h. 2FPD constructs a graded organic‐inorganic interphase that limits water access to the zinc surface and accelerates Zn 2+ desolvation, and Zn//MnO 2 full cells retain 96% capacity over 4000 cycles. This workflow offers a route towards interpretability‐guided additive design.

Schlagwörter

Stichwörter der Autor:innen

aqueous zinc‐ion batterieselectrolyte additivesinterfacial engineeringinterpretable machine learningzinc anode

Autor:innen und Institutionen

  • Jiangsu Key Laboratory for the Chemistry of Low-Dimensional Materials, School of Chemistry and Chemical Engineering, Huaiyin Normal University, Huai'an, P. R. China.
  • Key Laboratory for Soft Chemistry and Functional Materials of Ministry of Education, Nanjing University of Science and Technology, Nanjing, P. R. China.
  • State Key Laboratory of Heavy Oil Processing, College of Chemical Engineering and Environment, China University of Petroleum-Beijing, Beijing, P. R. China.

ORCID-Profile: Guolang Zhou, Minmeng Tang, Zhendong Yu, Wenshuai Zhu, Junwu Zhu

Förderung

  • National Natural Science Foundation of China
  • National Science Foundation for Distinguished Young Scholars
  • Natural Science Foundation of Jiangsu Province
  • Major Project of Basic Natural Science Research for Colleges and Universities in Jiangsu Province
  • China Postdoctoral Science Foundation

Zitieren

APA

Zhou, G., Tang, M., Xu, X., Tang, X., Wang, T., Zhao, C., Tang, C., Liu, C., Miao, T., Xu, L., Yan, Y., Yu, Z., Cheng, Z., Zhang, L., Zhu, W., & Zhu, J. (2026). Attribution Fingerprinting by Interpretable Machine Learning Reveals Category‐Specific Additive Design Rules for Zinc Anodes. Advanced Materials. https://doi.org/10.1002/adma.75609

Vancouver

Zhou G, Tang M, Xu X, Tang X, Wang T, Zhao C, et al. Attribution Fingerprinting by Interpretable Machine Learning Reveals Category‐Specific Additive Design Rules for Zinc Anodes. Advanced Materials. 2026. doi:10.1002/adma.75609

BibTeX
@article{Zhou2026,
  author = {Zhou, Guolang and Tang, Minmeng and Xu, Xinwang and Tang, Xin and Wang, Tianshi and Zhao, Chong and Tang, Chao and Liu, Cheng and Miao, Tengfei and Xu, Le and Yan, Yubo and Yu, Zhendong and Cheng, Zhipeng and Zhang, Lili and Zhu, Wenshuai and Zhu, Junwu},
  title = {Attribution Fingerprinting by Interpretable Machine Learning Reveals Category‐Specific Additive Design Rules for Zinc Anodes},
  journal = {Advanced Materials},
  year = {2026},
  doi = {10.1002/adma.75609}
}
Kostenlos starten →