Selective Laser Sintering and Graphitization for Mono‐Matrix Unibody Fabrication of Integrated Stereo‐Circuit and Stereo‐Fluidic Wearable Electronics
Advanced Materials · 2026-11 · 38 (62)
DOI: 10.1002/adma.75075 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 21.09.2026. Verfasst von Li Zhang und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, The Chinese University of Hong Kong, Hong Kong, China. Hauptthemen laut MEDLINE: Lasers, Wearable Electronic Devices, Biosensing Techniques, Graphite. Die Arbeit nennt 100 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Chinese University of Hong Kong.
Abstract (Originalsprache)
Wearable integrated electronic devices for biomedical, robotics, and sensing applications require greater compactness and functional complexity while maintaining wearability. However, seamlessly integrating electronic and microfluidic components remain challenging due to fabrication heterogeneity, material mismatches, and complex assembly requirements. In this study, we present an innovative selective laser sintering and graphitization (SLSG) 3D printing technology that enables seamless integration of 3D circuits (stereo‐circuits) and 3D fluidic channels (stereo‐fluidics). SLSG achieves unibody, autonomous mono‐matrix fabrication through adaptive photonic modulation of carbon‐rich precursors (e.g., polyetheretherketone (PEEK) powder), simultaneously creating insulating sintered structures and conductive graphitized patterns with conductivity up to 1,895 S/m, yielding 7.64‐fold higher electrochemical performance than classic glassy carbon electrodes (GCEs). Using SLSG, we fabricated a watch‐type wearable unibody multimodal microfluidic biosensor (UMMB) with integrated electrochemical biosensors for on‐body sweat metabolite monitoring. UMMB incorporates stereo‐circuits for sensing and signal routing, plus stereo‐fluidic channels for sweat respiration, achieving effective lactate and glucose sensing. The device demonstrates excellent sensitivities of 29.43 and 16.86 µA/mM for detecting lactate and glucose, respectively, while exhibiting nondetectable interference or circuit‐fluidic crosstalk. This novel SLSG 3D printing technology introduces a transformative unibody approach to fabricate multifunctional bioelectronic‐fluidic platform for integrated point‐of‐care devices, wearable sensors/biosensors, actuators, advanced theranostics, and personalized biomedical devices.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Biomedical Engineering, The Chinese University of Hong Kong, Hong Kong, China.
ORCID-Profile: Wing Cheung Mak
Förderung
- The Chinese University of Hong Kong
Zitieren
APA
Zhang, L., & Mak, W. C. (2026). Selective Laser Sintering and Graphitization for Mono‐Matrix Unibody Fabrication of Integrated Stereo‐Circuit and Stereo‐Fluidic Wearable Electronics. Advanced Materials, 38(62). https://doi.org/10.1002/adma.75075
Vancouver
Zhang L, Mak WC. Selective Laser Sintering and Graphitization for Mono‐Matrix Unibody Fabrication of Integrated Stereo‐Circuit and Stereo‐Fluidic Wearable Electronics. Advanced Materials. 2026;38(62). doi:10.1002/adma.75075
BibTeX
@article{Zhang2026,
author = {Zhang, Li and Mak, Wing Cheung},
title = {Selective Laser Sintering and Graphitization for Mono‐Matrix Unibody Fabrication of Integrated Stereo‐Circuit and Stereo‐Fluidic Wearable Electronics},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {62},
doi = {10.1002/adma.75075}
}
EUVIMED