EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Toward Pore‐Engineered 3D‐Printed Materials for Sorption Water Harvesting, Interfacial Evaporation, and Radiative Cooling

Dejan J Trajkovski iD, Higgins M Wilson iD, Abdallah Y M Ali iD, Jiaxing Xu iD, Ruzhu Wang iD, Primož Poredoš iD

Advanced Materials · 2026-11 · 38 (61)

DOI: 10.1002/adma.74850 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Advanced Materials, online erschienen am 31.08.2026. Verfasst von Dejan J Trajkovski und 5 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory for Sustainable Technologies in Buildings, Faculty of Mechanical Engineering, University of Ljubljana, Ljubljana, Slovenia. Die Arbeit nennt 236 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovenian Research and Innovation Agency (ARIS), Basic research project Dr. Aleš Debeljak Programme, Dejan Trajkovski received funding from ARIS under the Young Researcher Programme.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Water scarcity has intensified interest in passive, sorption‐based atmospheric water harvesting (SAWH), interfacial evaporation (IE), and radiative cooling (RC) technologies that operate at the energy–water–air nexus through coupled heat and mass transfer. Although these approaches are frequently associated with hierarchical porous materials, their performance depends more fundamentally on mesoscale architecture, interfacial design, and system‐level integration than on intrinsic nanoscale porosity alone. Additive manufacturing (AM) offers a versatile platform for engineering such architectures, providing precise control over geometry, connectivity, and functional gradients, while also enabling post‐processing routes to introduce additional porosity where required. Unlike existing reviews that primarily focus on material systems or individual applications, this review establishes a unified manufacturing‐ and pore‐architecture‐centric perspective across SAWH, IE, and RC, emphasizing how AM processing governs transfer behavior and multifunctional performance. This review focuses on the role of AM in structuring porous and semi‐porous materials for SAWH, IE, and RC, with particular emphasis on extrusion‐based methods such as direct ink writing that offer broad material compatibility and process flexibility. We assess the most relevant 3D printing technologies for these applications and discuss their incorporation into operational devices. To address the absence of standardized, application‐specific evaluation methods, we introduce a comprehensive characterization framework linking printing resolution, architectural features, and functional performance, including sorption dynamics, thermal robustness, and multifunctional coupling. Finally, we discuss future opportunities for composite design, system‐level integration, and artificial‐intelligence‐assisted optimization to advance scalable water and thermal management solutions.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingatmospheric water harvestinginterfacial solar evaporationmaterials sciencenanotechnologyprocess engineeringradiative cooling

Autor:innen und Institutionen

  • Laboratory for Sustainable Technologies in Buildings, Faculty of Mechanical Engineering, University of Ljubljana, Ljubljana, Slovenia.
  • Institute of Refrigeration and Cryogenics, Engineering Research Center of Solar Energy (MOE China), Shanghai Jiao Tong University, Shanghai, China.

ORCID-Profile: Dejan J Trajkovski, Higgins M Wilson, Abdallah Y M Ali, Jiaxing Xu, Ruzhu Wang, Primož Poredoš

Förderung

  • Slovenian Research and Innovation Agency (ARIS)
  • Basic research project Dr. Aleš Debeljak Programme
  • Dejan Trajkovski received funding from ARIS under the Young Researcher Programme
  • UL VIP project (ReGreenUrb)
  • Program/Project
  • Slovenian Research and Innovation Agency (ARIS) and National Natural Science Foundation of China (NSFC)
  • A joint bilateral research project between the Republic of Slovenia
  • People's Republic of China

Zitieren

APA

Trajkovski, D. J., Wilson, H. M., Ali, A. Y. M., Xu, J., Wang, R., & Poredoš, P. (2026). Toward Pore‐Engineered 3D‐Printed Materials for Sorption Water Harvesting, Interfacial Evaporation, and Radiative Cooling. Advanced Materials, 38(61). https://doi.org/10.1002/adma.74850

Vancouver

Trajkovski DJ, Wilson HM, Ali AYM, Xu J, Wang R, Poredoš P. Toward Pore‐Engineered 3D‐Printed Materials for Sorption Water Harvesting, Interfacial Evaporation, and Radiative Cooling. Advanced Materials. 2026;38(61). doi:10.1002/adma.74850

BibTeX
@article{Trajkovski2026,
  author = {Trajkovski, Dejan J and Wilson, Higgins M and Ali, Abdallah Y M and Xu, Jiaxing and Wang, Ruzhu and Poredoš, Primož},
  title = {Toward Pore‐Engineered 3D‐Printed Materials for Sorption Water Harvesting, Interfacial Evaporation, and Radiative Cooling},
  journal = {Advanced Materials},
  year = {2026},
  volume = {38},
  number = {61},
  doi = {10.1002/adma.74850}
}
Kostenlos starten →