EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Breaking the Surface: Buoyant Metal–Polymer Open–Cell Hybrid Lattice Metamaterials

Jordan Noronha iD, Joey Tallon iD, Raad Omar, Jason Dash, Andrey Molotnikov iD, Martin Leary, Milan Brandt, Ma Qian iD

Advanced Materials · 2026-11 · 38 (61)

DOI: 10.1002/adma.74641 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 28.08.2026. Verfasst von Jordan Noronha und 7 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, Victoria, Australia. Die Arbeit nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Australian Research Council, RMIT School of Engineering.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metallic lattice metamaterials have demonstrated transformative potential across biomedical, aerospace, defense, and thermal engineering. Yet their application in buoyant marine structures has remained elusive, as their open‐cell architectures inherently prevent flotation, even at densities below that of water. Here, we present the first buoyant metal–polymer open‐cell hybrid lattice metamaterial. The design is guided by a novel skeletal density framework, built around an environment‐independent buoyancy parameter that excludes externally accessible porosity. The resulting hybrid architecture combines Ti‐6Al‐4V hollow‐strut lattices (HSLs)—fabricated by laser‐based powder bed fusion (PBF‐LB)—with expandable polyurethane (PU) foam injected into the internal channels of each strut. This architecture retains external open‐cell permeability while achieving skeletal densities below 1.0 g/cm 3 , enabling reliable buoyancy prediction and control. Real‐world applicability is demonstrated using a Ti‑6Al‑4V+PU hybrid buoy that floats stably in natural seawater. This hybrid architecture exhibits higher specific strength than conventional marine materials such as high‑density polyethylene (HDPE) and 316L stainless steel (SS316L). Seawater immersion tests further demonstrate corrosion resistance and water‑exclusion capability. Finite‑element simulations elucidate fracture initiation and predict failure modes consistent with experimental observations. Importantly, these hybrid buoyant architectures preserve flotation even after severe structural damage. This work introduces a new class of buoyant metamaterials and establishes skeletal density as a general design principle for open‑cell structures in targeted liquid media.

Schlagwörter

Stichwörter der Autor:innen

hybrid lattice metamaterialslaser‐based powder bed fusionmarine engineeringpolyurethanetitanium

Autor:innen und Institutionen

  • Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, Victoria, Australia.
  • PIMM Laboratory, Conservatoire National des Arts et Métiers (CNAM), Paris, France.

ORCID-Profile: Jordan Noronha, Joey Tallon, Andrey Molotnikov, Ma Qian

Förderung

  • Australian Research Council
  • RMIT School of Engineering

Zitieren

APA

Noronha, J., Tallon, J., Omar, R., Dash, J., Molotnikov, A., Leary, M., Brandt, M., & Qian, M. (2026). Breaking the Surface: Buoyant Metal–Polymer Open–Cell Hybrid Lattice Metamaterials. Advanced Materials, 38(61). https://doi.org/10.1002/adma.74641

Vancouver

Noronha J, Tallon J, Omar R, Dash J, Molotnikov A, Leary M, et al. Breaking the Surface: Buoyant Metal–Polymer Open–Cell Hybrid Lattice Metamaterials. Advanced Materials. 2026;38(61). doi:10.1002/adma.74641

BibTeX
@article{Noronha2026,
  author = {Noronha, Jordan and Tallon, Joey and Omar, Raad and Dash, Jason and Molotnikov, Andrey and Leary, Martin and Brandt, Milan and Qian, Ma},
  title = {Breaking the Surface: Buoyant Metal–Polymer Open–Cell Hybrid Lattice Metamaterials},
  journal = {Advanced Materials},
  year = {2026},
  volume = {38},
  number = {61},
  doi = {10.1002/adma.74641}
}
Kostenlos starten →