In Situ‐Constructed Elastomeric Interphase for Grain Boundary Stabilization in High‐Voltage Layered Oxide Cathodes
Advanced Materials · 2026-08 · 38 (46)
DOI: 10.1002/adma.74129 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 11.07.2026. Verfasst von Fan Lin und 8 weiteren Autor:innen. Beteiligte Einrichtung: Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei Key Laboratory of Polymer Materials, Hu…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Layered oxide cathodes are a leading class of high‐energy‐density electrode materials for lithium‐ion batteries, but their long‐term stability at high voltages is compromised by chemical corrosion and mechanical stress at grain boundaries. Here, we report the construction of an elastic and voltage‐tolerant poly(urea‐siloxane) (PUSi) coating via the in situ polymerization of amine‐terminated polydimethylsiloxane and toluene diisocyanate (TDI). This polymer acted as a conformal artificial interphase that stabilized the secondary‐particle surface and internal primary‐particle surfaces. The PUSi layer acted as a stable chemical barrier that isolated cathode interfaces from direct contact with the electrolyte. This suppressed interfacial side reactions and inhibited the layered‐to‐spinel phase transformation. The tailorable elasticity of the PUSi layer allowed it to accommodate cyclic volumetric variations and suppress intergranular cracking during high‐voltage cycling. When applied to LiNi 0.6 Co 0.2 Mn 0.2 O 2 , the cathode showed a capacity retention of 81.2% after 450 cycles in coin cells and 82.4% after 200 cycles in Li‐metal pouch cells under a cut‐off voltage of 4.5 V. The generality of this approach was demonstrated by using it to coat LiNi 0.8 Co 0.1 Mn 0.1 O 2 and lithium‐rich layered oxides. This work provides a scalable and eco‐friendly route for engineering grain boundaries and interfacial stability in high‐energy cathode systems.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Ministry of Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei Key Laboratory of Polymer Materials, Hubei University, Wuhan, Hubei, China.
- State Key Laboratory of Material Processing and Die & Mould Technology, Department of Mechanics, School of Aerospace Engineering, Huazhong University of Science and Technology, Wuhan, Hubei, China.
- Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, China.
- College of Chemistry, Huazhong Agricultural University, Wuhan, Hubei, China.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Lin, F., Fan, H., Wang, Z., Ke, C., Chen, Q., Zhang, X. D., Ye, H., Yang, H., & Zheng, Z. J. (2026). In Situ‐Constructed Elastomeric Interphase for Grain Boundary Stabilization in High‐Voltage Layered Oxide Cathodes. Advanced Materials, 38(46). https://doi.org/10.1002/adma.74129
Vancouver
Lin F, Fan H, Wang Z, Ke C, Chen Q, Zhang XD, et al. In Situ‐Constructed Elastomeric Interphase for Grain Boundary Stabilization in High‐Voltage Layered Oxide Cathodes. Advanced Materials. 2026;38(46). doi:10.1002/adma.74129
BibTeX
@article{Lin2026,
author = {Lin, Fan and Fan, Haoqi and Wang, Ziyun and Ke, Changhui and Chen, Qin and Zhang, Xu-Dong and Ye, Huan and Yang, Hui and Zheng, Zi-Jian},
title = {In Situ‐Constructed Elastomeric Interphase for Grain Boundary Stabilization in High‐Voltage Layered Oxide Cathodes},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {46},
doi = {10.1002/adma.74129}
}
EUVIMED