Surface‐Functionalized LLZO‐Incorporated Multilayer Composite Solid Electrolytes for Dendrite Suppression and Efficient Ionic Conduction in Lithium–Metal Batteries
Advanced Materials · 2026-08 · 38 (43)
DOI: 10.1002/adma.73879 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 25.06.2026. Verfasst von Fazal Ur Rehman und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Polymer Engineering, Chonnam National University, Gwangju, South Korea. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, National Research Facilities and Equipment Center.
Abstract (Originalsprache)
The development of solid polymer electrolytes is central to safe, high‐energy lithium‐metal batteries (LMBs); however, persistent challenges including dendritic‐lithium‐growth, interfacial instability, and low ionic‐conductivity impede their commercialization. Herein, we report a tri‐layered composite solid electrolyte (CSE) that couples interfacial engineering with mechanical‐reinforcement to address them. The outer layers consist of PEO/LiTFSI, while inner layer comprises a PEO/LiTFSI matrix reinforced with polydopamine‐coated Li 7 La 3 Zr 2 O 12 (PDA@LLZO, 10–40 wt%) and poly(ethylene glycol)‐block‐poly(propylene glycol)‐block‐poly(ethylene glycol) (PPP). The PDA coating promotes strong hydrogen‐bonding with PEO‐matrix, leading to uniform dispersion and reduced interfacial resistance. LLZO enables percolated Li + ‐transport channels and disrupts PEO crystallinity, advancing segmental dynamics. Simultaneously, PPP elastomers offer mechanical compliance, redistribute localized stress, and dissipate dendritic intrusions to suppress crack propagation. The optimized CSE‐30 (30 wt% PDA@LLZO) exhibits an ionic‐conductivity of 5.60×10 −3 S cm − 1 at 60°C and 8.04 × 10 −5 S cm − 1 at 25°C, nearly four‐times higher than PEO, with a Li + ‐transference number of 0.81 and anodic stability up to 5.6 V vs. Li/Li + . In Li/LFP full cells, CSE‐30 delivered a capacity of 133.6 mAh g − 1 at 0.5C with 80% retention after 1000 cycles and Li/Li symmetric cells sustained over 1000 h cycling without short‐circuiting. This multifunctional CSE design advances next‐generation solid‐state LMBs by integrating efficient Li + ‐transport and mechanical resilience.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Polymer Engineering, Chonnam National University, Gwangju, South Korea.
- Korea Institute of Industrial Technology, Gwangju, South Korea.
- School of Polymer Science and Engineering, Chonnam National University, Gwangju, South Korea.
ORCID-Profile: Jinsub Lim, Mincheol Chang
Förderung
- National Research Foundation of Korea
- National Research Facilities and Equipment Center
Zitieren
APA
Rehman, F. U., Woo, M., Choi, H., Kim, J., Kim, Y., Park, S., Ahn, S., Lim, J., Kim, M., & Chang, M. (2026). Surface‐Functionalized LLZO‐Incorporated Multilayer Composite Solid Electrolytes for Dendrite Suppression and Efficient Ionic Conduction in Lithium–Metal Batteries. Advanced Materials, 38(43). https://doi.org/10.1002/adma.73879
Vancouver
Rehman FU, Woo M, Choi H, Kim J, Kim Y, Park S, et al. Surface‐Functionalized LLZO‐Incorporated Multilayer Composite Solid Electrolytes for Dendrite Suppression and Efficient Ionic Conduction in Lithium–Metal Batteries. Advanced Materials. 2026;38(43). doi:10.1002/adma.73879
BibTeX
@article{Rehman2026,
author = {Rehman, Fazal Ur and Woo, Minhong and Choi, Hyesoo and Kim, Jihwan and Kim, Yujin and Park, Sanghee and Ahn, Serim and Lim, Jinsub and Kim, Minyoung and Chang, Mincheol},
title = {Surface‐Functionalized LLZO‐Incorporated Multilayer Composite Solid Electrolytes for Dendrite Suppression and Efficient Ionic Conduction in Lithium–Metal Batteries},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {43},
doi = {10.1002/adma.73879}
}
EUVIMED