EUVIMEDEUVIMED entdecken
Open Access

Microphase Rivet‐Reinforced Interfaces in PTFE Composites: Enabling High Thermal Conductivity and Dimensional Stability for High‐Frequency Substrates

Hanyu Guo, Renke Li, Wei Gao, Yuting Kong, Yongfeng Li, Rong Chen, Hong Wu iD, Shaoyun Guo

Advanced Materials · 2026-07 · 38 (41)

DOI: 10.1002/adma.73747 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 19.06.2026. Verfasst von Hanyu Guo und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Polymer Materials, Polymer Research Institute of Sichuan University, Sichuan Provincial Engineering Research Center …. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: National Natural Science Foundation of China, Science and Technology Department of Sichuan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Heat dissipation remains a formidable challenge for polytetrafluoroethylene (PTFE) based high‐frequency substrates, as the integration of thermally conductive fillers like hexagonal boron nitride (hBN) is often hindered by the intrinsic chemical inertness and ultra‐low surface energy of PTFE. Herein, a soluble fluoroalkyl end‐capped polyimide (FPI) precursor is developed. The amphipathic structure of FPI acts as an intermolecular bridge, facilitating the homogeneous dispersion of hydrophobic hBN within aqueous PTFE emulsions. Upon thermal imidization, in situ microphase “rivet” architectures evolve at the filler‐matrix boundaries, replacing fragile van der Waals contacts with robust, mechanically anchored transitional zones. The topological interlocking significantly restricts the long‐range segmental mobility of PTFE chains, yielding an exceptional thermal conductivity of 2.89 W/m·K (a 7.5‐fold increase) alongside an ultralow copper‐matched coefficient of thermal expansion (12 ppm/K). Remarkably, these breakthroughs are achieved while preserving superior dielectric properties (permittivity D k = 2.52, loss tangent D f = 0.00078 @ 10 GHz). This work establishes a universal and scalable blueprint for fabricating extreme‐performance PTFE substrates tailored for the stringent demands of next‐generation 5G/6G telecommunications.

Schlagwörter

Stichwörter der Autor:innen

dielectric propertiesmicrophase rivetpolyimidepolytetrafluoroethylenethermal conductivity

Autor:innen und Institutionen

  • State Key Laboratory of Advanced Polymer Materials, Polymer Research Institute of Sichuan University, Sichuan Provincial Engineering Research Center of Plastic/Rubber Complex Processing Technology, Chengdu, China.
  • Luzhou North Cellulose Co., Ltd., Luzhou, China.

ORCID-Profile: Hong Wu

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Department of Sichuan Province

Zitieren

APA

Guo, H., Li, R., Gao, W., Kong, Y., Li, Y., Chen, R., Wu, H., & Guo, S. (2026). Microphase Rivet‐Reinforced Interfaces in PTFE Composites: Enabling High Thermal Conductivity and Dimensional Stability for High‐Frequency Substrates. Advanced Materials, 38(41). https://doi.org/10.1002/adma.73747

Vancouver

Guo H, Li R, Gao W, Kong Y, Li Y, Chen R, et al. Microphase Rivet‐Reinforced Interfaces in PTFE Composites: Enabling High Thermal Conductivity and Dimensional Stability for High‐Frequency Substrates. Advanced Materials. 2026;38(41). doi:10.1002/adma.73747

BibTeX
@article{Guo2026,
  author = {Guo, Hanyu and Li, Renke and Gao, Wei and Kong, Yuting and Li, Yongfeng and Chen, Rong and Wu, Hong and Guo, Shaoyun},
  title = {Microphase Rivet‐Reinforced Interfaces in PTFE Composites: Enabling High Thermal Conductivity and Dimensional Stability for High‐Frequency Substrates},
  journal = {Advanced Materials},
  year = {2026},
  volume = {38},
  number = {41},
  doi = {10.1002/adma.73747}
}
Kostenlos starten →