2D Perovskite Engineering Enables Robust Self‐Assembled Monolayers for High‐Performance Perovskite Solar Cells
Advanced Materials · 2026-07 · 38 (38)
DOI: 10.1002/adma.73561 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 02.06.2026. Verfasst von Zihan Gu und 10 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Flexible Electronics (LoFE) & Institute of Advanced Materials (IAM), School of Flexible Electronics (Future Technologies), Na…. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: Natural Science Foundation of China, National Key Research and Development Program of China, Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China.
Abstract (Originalsprache)
Self‐assembled monolayers (SAMs) are critical hole‐selective contacts in inverted perovskite solar cells (PSCs), yet their practical implementation is hindered by desorption and aggregation during solution‐based perovskite deposition. Here, we report a transient two‐dimensional (2D) perovskite protection strategy using volatile propylammonium chloride, which temporarily shields SAMs from solvent‐induced degradation and subsequently decouples during thermal annealing. This mechanism preserves the integrity of the SAM interface while enabling uniform crystallization of large‐area perovskite films and efficient charge extraction. Consequently, PSCs achieve a power conversion efficiency (PCE) of 26.14% for 0.05 cm 2 devices, 23.27% for a 5 × 5 cm 2 mini‐module, and 22.34% for a 30 × 30 cm 2 module (615.7 cm 2 active area). Notably, the large‐area module retains 90% of its initial efficiency after 2000 h of continuous maximum power point operation, demonstrating both high performance and operational stability, highlighting a scalable route for reliable perovskite photovoltaics.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Flexible Electronics (LoFE) & Institute of Advanced Materials (IAM), School of Flexible Electronics (Future Technologies), Nanjing Tech University (NanjingTech), Nanjing, P. R. China.
- Jiangsu Zhongtian Technology Co., Ltd., Nantong, Jiangsu, P. R. China.
- Shanghai Synchrotron Radiation Facility, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai, P. R. China.
ORCID-Profile: Xingyu Gao, Zhelu Hu, Yonghua Chen
Förderung
- Natural Science Foundation of China
- National Key Research and Development Program of China
- Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China
- Jiangsu Provincial Departments of Science and Technology
- National Natural Science Foundation of China
Zitieren
APA
Gu, Z., Wang, K., Yan, R., Yang, G., Gao, X., Guo, Q., Xia, Y., Hu, Z., Xie, S., Chao, L., & Chen, Y. (2026). 2D Perovskite Engineering Enables Robust Self‐Assembled Monolayers for High‐Performance Perovskite Solar Cells. Advanced Materials, 38(38). https://doi.org/10.1002/adma.73561
Vancouver
Gu Z, Wang K, Yan R, Yang G, Gao X, Guo Q, et al. 2D Perovskite Engineering Enables Robust Self‐Assembled Monolayers for High‐Performance Perovskite Solar Cells. Advanced Materials. 2026;38(38). doi:10.1002/adma.73561
BibTeX
@article{Gu2026,
author = {Gu, Zihan and Wang, Kaiyu and Yan, Ruigang and Yang, Guang and Gao, Xingyu and Guo, Qingxun and Xia, Yingdong and Hu, Zhelu and Xie, Shuhong and Chao, Lingfeng and Chen, Yonghua},
title = {2D Perovskite Engineering Enables Robust Self‐Assembled Monolayers for High‐Performance Perovskite Solar Cells},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {38},
doi = {10.1002/adma.73561}
}
EUVIMED