Harnessing High‐Pressure CO 2 for Molecular‐Scale Interfacial Engineering in Sulfide‐Based All‑Solid‑State Lithium Metal Batteries
Advanced Materials · 2026-07 · 38 (37)
DOI: 10.1002/adma.73554 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 29.05.2026. Verfasst von Ruyi Fang und 10 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: Natural Science Foundation of Zhejiang Province, National Natural Science Foundation of China, Science and Technology Department of Zhejiang Province.
Abstract (Originalsprache)
The rapid expansion of the low‐altitude economy has intensified the demand for energy storage with exceptional rate capability. Sulfide electrolytes, with high room‐temperature ionic conductivity and processability, are pivotal for next‐generation all‐solid‐state batteries (ASSBs), but their interfacial instability and the resulting low critical current density severely hinder high‐rate performance. Here, we propose a molecular‐level interfacial construction strategy using high‐pressure CO 2 to in situ engineer the Li 6 PS 5 Cl (LPSC) surface. Through precise regulation with concentrated CO 2 molecules, a nanoscale Li 2 CO 3 ‐rich layer with high Young's modulus and superior oxidant‑resistance is constructed. This designed interphase effectively suppresses parasitic reactions, enhances mechanical integrity, and homogenizes Li‐ion flux. Consequently, the modified LPSC exhibits exceptional dendrite‐suppression capability, achieving a critical current density of 7.76 mA cm −2 , and enables stable Li plating and stripping over 920 h at 5 mA cm −2 in symmetric cells. Furthermore, full cells paired with a high‐voltage LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathode demonstrated outstanding rate capability at 5C with a power density of 3160 W kg −1 and maintained stable cycling over 500 cycles at 0.5C. This work proposes a simple and effective molecular‐scale interface engineering method to overcome the power limitation problem of sulfide‐based ASSBs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou, China.
- State Key Laboratory of Green Chemical Synthesis and Conversion, Zhejiang University of Technology, Hangzhou, China.
- State Key Laboratory of Advanced Separation Membrane Materials, Zhejiang University of Technology, Hangzhou, China.
ORCID-Profile: Min Fan, Hui Huang, Jun Zhang, Xinyong Tao, Yang Xia, Wenkui Zhang
Förderung
- Natural Science Foundation of Zhejiang Province
- National Natural Science Foundation of China
- Science and Technology Department of Zhejiang Province
- Baima Lake Laboratory Joint Funds of the Zhejiang Provincial Natural Science Foundation
Zitieren
APA
Fang, R., Fu, X., Wang, X., Ma, R., Fan, M., Huang, H., Zhang, J., Xia, X., Tao, X., Xia, Y., & Zhang, W. (2026). Harnessing High‐Pressure CO 2 for Molecular‐Scale Interfacial Engineering in Sulfide‐Based All‑Solid‑State Lithium Metal Batteries. Advanced Materials, 38(37). https://doi.org/10.1002/adma.73554
Vancouver
Fang R, Fu X, Wang X, Ma R, Fan M, Huang H, et al. Harnessing High‐Pressure CO 2 for Molecular‐Scale Interfacial Engineering in Sulfide‐Based All‑Solid‑State Lithium Metal Batteries. Advanced Materials. 2026;38(37). doi:10.1002/adma.73554
BibTeX
@article{Fang2026,
author = {Fang, Ruyi and Fu, Xiaohan and Wang, Xinxu and Ma, Ruojian and Fan, Min and Huang, Hui and Zhang, Jun and Xia, Xinhui and Tao, Xinyong and Xia, Yang and Zhang, Wenkui},
title = {Harnessing High‐Pressure CO 2 for Molecular‐Scale Interfacial Engineering in Sulfide‐Based All‑Solid‑State Lithium Metal Batteries},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {37},
doi = {10.1002/adma.73554}
}
EUVIMED