Polyphosphates‐Based Cathode‐Electrolyte Interphase for 4.65 V LiCoO 2
Advanced Materials · 2026-05 · 38 (27)
DOI: 10.1002/adma.73065 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 16.04.2026. Verfasst von Hengyu Ren und 14 weiteren Autor:innen. Beteiligte Einrichtung: School of Advanced Materials, Peking University Shenzhen Graduate School, Peking University, Shenzhen, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation, National Center for International Research of Power Batteries and Materials, Guangdong Key Laboratory of Design and calculation of New Energy Materials.
Abstract (Originalsprache)
The stable interfacial chemistry of LiCoO 2 (LCO) is the cornerstone for its high‐voltage operation. However, interfacial side reactions, originating from the Co/O catalytic sites, lead to ethylene carbonate (EC) oxidation, lithium hexafluorophosphate (LiPF 6 ) hydrolysis, and LCO surface degradation. Herein, we propose that the formation of functional phosphate derivatives (FPD) in the electrolyte, which are generated from the reaction between tris(trimethylsilyl) phosphate (TMSP) and PF 6 − anions, can achieve targeted regulation of the polyphosphates cathode‐electrolyte interphase (CEI). During cycling, the FPD spontaneously forms covalent interactions with surface Co/O sites, triggering in situ polymerization that constructs a robust and full‐coverage CEI on LCO. The resulting CEI is enriched with polyphosphates and LiF/Li 2 O, which ensures high thermodynamic stability and fast Li + transport kinetics simultaneously. Consequently, the LCO with optimized electrolyte (1.0 M LiPF 6 in fluoroethylene carbonate (FEC)‐based solvents with 2.0 wt.% TMSP) demonstrates exceptional cell performance with a high capacity retention of 81.0% after 3000 cycles within 3.0–4.6 V (vs. Li/Li + ), 81.6% after 2000 cycles within 3.0–4.65 V, and shows the feasibility in the LCO||graphite pouch cell with a retention of 80.0% after 500 cycles. This work provides a new insight into the uniform CEI construction for high‐voltage LCO cathodes through functional electrolyte engineering.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Advanced Materials, Peking University Shenzhen Graduate School, Peking University, Shenzhen, China.
- College of Physics and Energy, Fujian Normal University, Fuzhou, China.
- Department of Chemistry, The University of Hong Kong, Hong Kong, China.
- National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei, China.
- Department of Chemical and Biological Engineering, The Hong Kong University of Science and Technology, Hong Kong, China.
ORCID-Profile: Wenhua Zhang, Feng Pan
Förderung
- China Postdoctoral Science Foundation
- National Center for International Research of Power Batteries and Materials
- Guangdong Key Laboratory of Design and calculation of New Energy Materials
- Shenzhen Key Laboratory of New Energy Resources Genome Preparation and Testing
Zitieren
APA
Ren, H., Wang, X., Cai, W., Zhao, W., Xie, K., Zou, D., Zeng, T., Yu, F., Deng, Z., Yi, H., Xu, C., Zhang, W., Li, S., Zhao, Q., & Pan, F. (2026). Polyphosphates‐Based Cathode‐Electrolyte Interphase for 4.65 V LiCoO 2. Advanced Materials, 38(27). https://doi.org/10.1002/adma.73065
Vancouver
Ren H, Wang X, Cai W, Zhao W, Xie K, Zou D, et al. Polyphosphates‐Based Cathode‐Electrolyte Interphase for 4.65 V LiCoO 2. Advanced Materials. 2026;38(27). doi:10.1002/adma.73065
BibTeX
@article{Ren2026,
author = {Ren, Hengyu and Wang, Xiaohu and Cai, Wenwei and Zhao, Wenguang and Xie, Kunchen and Zou, Dongwen and Zeng, Tao and Yu, Funing and Deng, Zhikang and Yi, Haocong and Xu, Chunyu and Zhang, Wenhua and Li, Shunning and Zhao, Qinghe and Pan, Feng},
title = {Polyphosphates‐Based Cathode‐Electrolyte Interphase for 4.65 V LiCoO 2},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {27},
doi = {10.1002/adma.73065}
}
EUVIMED