Femtosecond Laser Non‐Diffracting‐Beam Lithography via Phase Modulation for Dielectric Metasurface Fabrication
Advanced Materials · 2026-02 · 38 (11)
DOI: 10.1002/adma.202521635 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 09.01.2026. Verfasst von Weina Han und 11 weiteren Autor:innen. Beteiligte Einrichtung: Laser Micro/Nano Fabrication Laboratory, School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China.
Abstract (Originalsprache)
Dielectric phase‐change metasurfaces enable programmable light control and show great application potential in optoelectronics. However, current technologies are limited by challenges in achieving high‐uniformity, high‐precision fabrication over large areas, as well as selective phase‐state modulation of individual meta‐atoms. To address these challenges, a femtosecond (fs)‐laser phase‐modulated non‐diffracting‐beam lithography (PNDL) technique is proposed. By superimposing axicon and blazed grating phases, the fs‐laser beam is shaped into a quasi‐Bessel non‐diffracting‐beam with a depth of focus over 10 times greater than that of a tightly focused Gaussian beam, thereby reducing the need for refocusing and minimizing focal drift. The dynamic beam deflection during fabrication can be controlled with 7 nm precision. The voxel metasurfaces composed of phase‐change regions are then chemically processed to achieve maskless lithography. PNDL is used to fabricate a tunable Ge 2 Sb 2 Te 5 metasurface with a structural feature size of 9 nm. Furthermore, multifunctional programmable photonic logic devices are fabricated and modulated, demonstrating high‐precision capabilities. This approach provides a novel paradigm for active metasurface fabrication and modulation, laying the foundation for next‐generation photonic devices.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laser Micro/Nano Fabrication Laboratory, School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China.
- Beijing Institute of Technology Chongqing Innovation Center, Chongqing, China.
- State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South University, Changsha, China.
- Department of Physics, ETH Zurich, Zurich, Switzerland.
- China Electronics Technology Group Corporation (CETC) The 10th Research Institute, Chengdu, China.
ORCID-Profile: Lan Jiang
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China
- State Key Laboratory of High-performance Precision Manufacturing
Zitieren
APA
Han, W., Zhao, K., Wei, D., Guo, Q., Tong, J., Zhang, Y., Hu, J., Cheng, Q., Wang, C., Pan, C., Lin, N., & Jiang, L. (2026). Femtosecond Laser Non‐Diffracting‐Beam Lithography via Phase Modulation for Dielectric Metasurface Fabrication. Advanced Materials, 38(11). https://doi.org/10.1002/adma.202521635
Vancouver
Han W, Zhao K, Wei D, Guo Q, Tong J, Zhang Y, et al. Femtosecond Laser Non‐Diffracting‐Beam Lithography via Phase Modulation for Dielectric Metasurface Fabrication. Advanced Materials. 2026;38(11). doi:10.1002/adma.202521635
BibTeX
@article{Han2026,
author = {Han, Weina and Zhao, Kailin and Wei, Donghui and Guo, Qin and Tong, Jintao and Zhang, Yansong and Hu, Jie and Cheng, Qian and Wang, Cong and Pan, Changji and Lin, Nai and Jiang, Lan},
title = {Femtosecond Laser Non‐Diffracting‐Beam Lithography via Phase Modulation for Dielectric Metasurface Fabrication},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {11},
doi = {10.1002/adma.202521635}
}
EUVIMED