Scalable Surface Alloying–Dealloying Manufactures Nanoporous Electrodes From Bulk Metals for Ampere‐Level Alkaline Water Electrolysis
Advanced Materials · 2026-03 · 38 (16)
DOI: 10.1002/adma.202521570 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 16.02.2026. Verfasst von Jiuhui Han und 11 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Crystal Materials, Tianjin Key Laboratory of Advanced Functional Porous Materials, Institute For New Energy Materials and Low…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Commercial deployment of alkaline water electrolysis requires electrodes that can sustain ampere‐level current densities while remaining manufacturable at scale; however, most advanced electrocatalysts demonstrated in laboratories lack mechanical robustness and are incompatible with industrial production. Here we report a vapor‐phase surface alloying–dealloying (VPA‐CD) strategy that converts commodity metal sheets directly into bulk‐supported nanoporous electrodes via in situ formation of catalyst layers metallurgically bonded to dense substrates. Applied to Ni‐Mo and Ni‐Fe alloys, this approach yields Mo single‐atom‐doped nanoporous Ni with high hydrogen evolution activity and nanoporous Ni(Fe)/Ni 3 Fe heterostructures with excellent oxygen evolution activity, enabling ampere‐level alkaline electrolysis at low cell voltages. Beyond planar substrates, the method scales to large‐area and patterned architectures that directly integrate flow fields and catalyst layers; the resulting integrated electrolyzer achieves 1.0 A cm −2 at only 1.84 V and remains stable for over 185 h, outperforming commercial benchmarks. These findings establish VPA‐CD as a robust and manufacturable route for engineering nanoporous electrodes, bridging the gap between catalyst discovery and device‐level hydrogen production.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Crystal Materials, Tianjin Key Laboratory of Advanced Functional Porous Materials, Institute For New Energy Materials and Low-Carbon Technologies, School of Materials Science and Engineering, Tia…
- Department of Electronics and Electrical Engineering, School of Engineering, The University of Edinburgh, Edinburgh, UK.
- Department of Materials Science and Engineering, Southern University of Science and Technology, Shenzhen, China.
ORCID-Profile: Jiuhui Han, Mingwei Chen
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Han, J., Li, Q., Li, C., Zhang, K., Xi, C., Zhang, Y., Qiao, L., Han, Y., Yue, P., Bi, L., Chen, M., & Ding, Y. (2026). Scalable Surface Alloying–Dealloying Manufactures Nanoporous Electrodes From Bulk Metals for Ampere‐Level Alkaline Water Electrolysis. Advanced Materials, 38(16). https://doi.org/10.1002/adma.202521570
Vancouver
Han J, Li Q, Li C, Zhang K, Xi C, Zhang Y, et al. Scalable Surface Alloying–Dealloying Manufactures Nanoporous Electrodes From Bulk Metals for Ampere‐Level Alkaline Water Electrolysis. Advanced Materials. 2026;38(16). doi:10.1002/adma.202521570
BibTeX
@article{Han2026,
author = {Han, Jiuhui and Li, Qi and Li, Chao and Zhang, Kaiyue and Xi, Cong and Zhang, Yu and Qiao, Lin and Han, Yunfan and Yue, Peng and Bi, Linji and Chen, Mingwei and Ding, Yi},
title = {Scalable Surface Alloying–Dealloying Manufactures Nanoporous Electrodes From Bulk Metals for Ampere‐Level Alkaline Water Electrolysis},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {16},
doi = {10.1002/adma.202521570}
}
EUVIMED