A Stable Sodium Metal Battery at −40°C: Multiphase Sodium‐Alloy Skeleton Guided Uniform Deposition and Fast Desolvation
Advanced Materials · 2026-02 · 38 (11)
DOI: 10.1002/adma.202521120 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 06.01.2026. Verfasst von Kaitong Yao und 9 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Provincial Key Laboratory on Functional Soft Condensed Matter, School of Materials and Energy, Guangdong University of Technology, Guangzho…. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Sodium metal batteries (SMBs) represent a promising candidate for high‐energy‐density storage. However, their practical implementation is hindered by dendrite growth and structural degradation of sodium metal anode (SMA). These challenges are exacerbated at ultralow temperatures, where sluggish Na + transport and inefficient desolvation lead to severe performance decline. Herein, we introduce five distinct Na‐M (M = Sn, Sb, Bi, In, and Ge) alloys into SMA via mechanical rolling, resulting in a multiphase sodium‐alloy composite anode (NSSBIG). This design enhances compositional disorder and establishes a stable sodium‐based alloy skeleton, which improves sodiophilicity and ion transport kinetics. Theoretical calculations reveal a multiphase synergistic effect among the alloys that accelerates charge transfer and promotes desolvation at −40°C. Benefiting from this tailored architecture, the NSSBIG symmetric cell achieves exceptional cycling stability over 1050 h at −40°C (0.1 mA cm −2 /0.1 mA h cm −2 ). When coupled with a Na 3 V 2 (PO 4 ) 3 cathode, the full cell retains 97% of its capacity after 825 cycles at −40°C (0.5 C), and a pouch‐cell configuration maintains 89.5% capacity retention over 300 cycles at −40°C (0.2 C). This work provides a feasible strategy for developing dendrite‐free anodes with rapid desolvation kinetics, establishing a viable pathway toward commercial ultralow‐temperature SMBs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Guangdong Provincial Key Laboratory on Functional Soft Condensed Matter, School of Materials and Energy, Guangdong University of Technology, Guangzhou, China.
- Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei, Anhui, China.
- Xi'an Institute of Science and Technology for New Energy, Xi'an Technological University, Xi'an, China.
ORCID-Profile: Yan Yu
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Yao, K., Liu, C., Yang, Y., Yang, Y., Yao, Y., He, S., Wu, Z., Pan, H., Rui, X., & Yu, Y. (2026). A Stable Sodium Metal Battery at −40°C: Multiphase Sodium‐Alloy Skeleton Guided Uniform Deposition and Fast Desolvation. Advanced Materials, 38(11). https://doi.org/10.1002/adma.202521120
Vancouver
Yao K, Liu C, Yang Y, Yang Y, Yao Y, He S, et al. A Stable Sodium Metal Battery at −40°C: Multiphase Sodium‐Alloy Skeleton Guided Uniform Deposition and Fast Desolvation. Advanced Materials. 2026;38(11). doi:10.1002/adma.202521120
BibTeX
@article{Yao2026,
author = {Yao, Kaitong and Liu, Congcong and Yang, Yang and Yang, Yongjian and Yao, Yu and He, Shengnan and Wu, Zhijun and Pan, Hongge and Rui, Xianhong and Yu, Yan},
title = {A Stable Sodium Metal Battery at −40°C: Multiphase Sodium‐Alloy Skeleton Guided Uniform Deposition and Fast Desolvation},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {11},
doi = {10.1002/adma.202521120}
}
EUVIMED