High‐κ Perovskite‐Like Ternary Niobium Oxide Dielectrics for 2D Electronics
Advanced Materials · 2026-02 · 38 (11)
DOI: 10.1002/adma.202520423 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 08.01.2026. Verfasst von Biao Zhang und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Physics, The Hong Kong Polytechnic University, Hong Kong, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
High‐κ dielectrics with exceptional interface quality are essential for the field‐effect control of nanoscale transistors. However, their design remains challenging due to competing atomic‐scale polarization requirements. Here, we demonstrate nonlayered perovskite‐like ternary niobium oxides (CaNb 2 O 6 , KNb 3 O 8 , and Na 2 Nb 4 O 11 ) as promising candidates, where strong Nb 4 d ‐O 2 p covalent hybridization enables pronounced Nb 5+ ionic displacements and enhanced polarization, while ionic bonding from intercalated Ca/K/Na suppresses electronic transitions, widening the bandgap and enhancing stability via configurational entropy. We successfully synthesize these high‐quality nanoflakes through a scalable molten‐salt method. Crucially, these oxides demonstrate a combination of high dielectric constants (∼16, 9, and 68 for CaNb 2 O 6 , KNb 3 O 8 , and Na 2 Nb 4 O 11 , respectively), wide bandgaps (∼4 eV), large breakdown field strengths (> 4.9 MV cm −1 ), and excellent air stability. Furthermore, due to the low‐contamination transfer via a fully dry process, MoS 2 field‐effect transistors with these gate dielectrics achieve low subthreshold swings (∼60 mV dec −1 ), ON/OFF ratios > 10 7 , gate leakage currents below 10 −6 A cm −2 , and ultralow trap densities. We show high‐performance NOT and NAND gates using a CaNb 2 O 6 dielectric layer, with the inverter achieving a static power consumption of < 0.02 µW and a gain of ∼20. This work provides new opportunities for the development of next‐generation 2D electronics devices.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Applied Physics, The Hong Kong Polytechnic University, Hong Kong, China.
- Joint Research Center of Microelectronics, The Hong Kong Polytechnic University, Hong Kong, China.
- School of Materials, Shenzhen Campus of Sun Yat-Sen University, Shenzhen, China.
ORCID-Profile: Biao Zhang, Yang Chai
Zitieren
APA
Zhang, B., Guo, J., Yan, J., Wang, J., Yun, C., Zeng, G., Li, J., Wang, C., Xie, Z., Hou, Y., & Chai, Y. (2026). High‐κ Perovskite‐Like Ternary Niobium Oxide Dielectrics for 2D Electronics. Advanced Materials, 38(11). https://doi.org/10.1002/adma.202520423
Vancouver
Zhang B, Guo J, Yan J, Wang J, Yun C, Zeng G, et al. High‐κ Perovskite‐Like Ternary Niobium Oxide Dielectrics for 2D Electronics. Advanced Materials. 2026;38(11). doi:10.1002/adma.202520423
BibTeX
@article{Zhang2026,
author = {Zhang, Biao and Guo, Jianmiao and Yan, Jianmin and Wang, Jialiang and Yun, Chao and Zeng, Guang and Li, Jie and Wang, Cong and Xie, Zhengdao and Hou, Yanglong and Chai, Yang},
title = {High‐κ Perovskite‐Like Ternary Niobium Oxide Dielectrics for 2D Electronics},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {11},
doi = {10.1002/adma.202520423}
}
EUVIMED