Highly Efficient and Stable All‐Weather Moisture Power Generation via Asymmetric Structured Color Photothermal Evaporation‐Induced Cotton Fabrics
Advanced Materials · 2026-02 · 38 (10)
DOI: 10.1002/adma.202518736 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 27.12.2025. Verfasst von Huiyu Yang und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry and Materials Science, Hubei Engineering University, Xiaogan, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Key Laboratory for New Textile Materials and Applications of Hubei Province (Wuhan Textile University).
Abstract (Originalsprache)
Harvesting electrical energy from the ubiquitous water cycle to power flexible electronic devices is receiving increasing attention. However, the development of moisture‐driven generators with high and stable power output remains a significant challenge. Here, we design a photothermal evaporation‐driven moisture generator (PEMG) that modifies a cotton fabric with in situ polymerized pyrrole by a polydopamine (PDA)‐structured color film to form an asymmetric photothermal temperature gradient. The PDA asymmetric photothermal layer not only effectively addresses the issue of insufficient sustained power generation caused by water adsorption saturation but also mitigates the unstable moisture gradient resulting from excessive water evaporation. CF@PPy@PDA (purple) achieved an open‐circuit voltage ( V oc ) of 0.74 V and a short‐circuit current ( I sc ) of 0.72 mA under 60% relative humidity (RH) and 1‐sun illumination, respectively. White LED bulbs emit a steady stream of light for more than 24 h. Moreover, the V oc of the PEMG (six units in series) reaches 1.18 V at an average solar intensity of 1000 W m −2 and 43% RH, while the V oc is 0.72 V at night (52% RH). Meanwhile, wearable systems designed with integrated PEMG units provide sufficient power supply for electronic devices under natural conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Chemistry and Materials Science, Hubei Engineering University, Xiaogan, China.
- Department of Materials Science and State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, China.
- School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou, China.
- State Key Laboratory of New Textile Materials and Advanced Processing, Wuhan Textile University, Wuhan, China.
ORCID-Profile: Huiyu Yang, Weilin Xu
Förderung
- National Natural Science Foundation of China
- Key Laboratory for New Textile Materials and Applications of Hubei Province (Wuhan Textile University)
Zitieren
APA
Yang, H., Cheng, X., Zhao, L., Zhang, X., Lu, B., Tan, Z., Liu, H., Xia, L., & Xu, W. (2026). Highly Efficient and Stable All‐Weather Moisture Power Generation via Asymmetric Structured Color Photothermal Evaporation‐Induced Cotton Fabrics. Advanced Materials, 38(10). https://doi.org/10.1002/adma.202518736
Vancouver
Yang H, Cheng X, Zhao L, Zhang X, Lu B, Tan Z, et al. Highly Efficient and Stable All‐Weather Moisture Power Generation via Asymmetric Structured Color Photothermal Evaporation‐Induced Cotton Fabrics. Advanced Materials. 2026;38(10). doi:10.1002/adma.202518736
BibTeX
@article{Yang2026,
author = {Yang, Huiyu and Cheng, Xiaohua and Zhao, Liangang and Zhang, Xiangyi and Lu, Bin and Tan, Zhengfei and Liu, Hai and Xia, Liangjun and Xu, Weilin},
title = {Highly Efficient and Stable All‐Weather Moisture Power Generation via Asymmetric Structured Color Photothermal Evaporation‐Induced Cotton Fabrics},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {10},
doi = {10.1002/adma.202518736}
}
EUVIMED