Chemo‐Mechanical Failure and Reinforcement of Solid Electrolyte Films for Practical All‐Solid‐State Li Metal Pouch Cells
Advanced Materials · 2026-03 · 38 (16)
DOI: 10.1002/adma.202518655 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 18.02.2026. Verfasst von Ki Heon Baeck und 14 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biomolecular Engineering, Yonsei University, Seoul, Republic of Korea. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 59 Literaturangaben. Gefördert von: National Research Foundation of Korea.
Abstract (Originalsprache)
All‐solid‐state Li metal batteries (ASLMBs) are the key to achieving high energy densities; however, studies on practically relevant pouch‐type cells remain scarce. A critical challenge lies in integrating thin solid electrolyte films, particularly under the high pressures required for cell assembly, which has been largely overlooked. Here, we reveal the inherent incompatibility of conventional sulfide solid electrolyte films with Li metal during pouch cell assembly. To address this challenge, we introduce a simple yet effective post‐engineering strategy that modifies the chemical interactions between Li 6 PS 5 Cl and nitrile butadiene rubber binders, significantly enhancing the mechanical robustness and Li metal compatibility, even under 450 MPa isostatic pressing. Complementary experimental analyses and finite element method simulations identify the underlying enhancement mechanism as the improvement of mechanical properties, which increases the interfacial friction. Leveraging these advancements, we successfully assemble LiNi 0.70 Co 0.15 Mn||Li ASLMB pouch cells without any interlayers through single‐step pressurization, achieving remarkable performance at 3 MPa, with 400‐cycle stability at 60°C and reliable operation at 30°C. Finally, we demonstrate a proof‐of‐concept bipolar‐stacked ASLMB pouch cell, showcasing its scalability and practicality. These findings establish a new benchmark for ASLMBs and provide key design principles for advancing practical high‐energy all‐solid‐state technologies.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical and Biomolecular Engineering, Yonsei University, Seoul, Republic of Korea.
- Department of Mechanical Engineering, Seoul National University, Seoul, Republic of Korea.
- Department of Energy and Materials Engineering, Dongguk University, Seoul, Republic of Korea.
- UNIST Central Research Facilities, Ulsan National Institute of Science and Technology (UNIST), Ulsan, Republic of Korea.
- Korea Institute of Energy Research (KIER), Daejeon, Republic of Korea.
- Department of Battery Engineering, Yonsei University, Seoul, Republic of Korea.
ORCID-Profile: Yun Seog Lee, Yoon Seok Jung
Förderung
- National Research Foundation of Korea
Zitieren
APA
Baeck, K. H., Song, Y. B., Kim, D., Jun, S., Lim, H., Choi, E., Kwon, G., Kim, H. Y., Oh, K. S., Han, S. P., Lee, S. Y., Yoon, H., Nam, K. W., Lee, Y. S., & Jung, Y. S. (2026). Chemo‐Mechanical Failure and Reinforcement of Solid Electrolyte Films for Practical All‐Solid‐State Li Metal Pouch Cells. Advanced Materials, 38(16). https://doi.org/10.1002/adma.202518655
Vancouver
Baeck KH, Song YB, Kim D, Jun S, Lim H, Choi E, et al. Chemo‐Mechanical Failure and Reinforcement of Solid Electrolyte Films for Practical All‐Solid‐State Li Metal Pouch Cells. Advanced Materials. 2026;38(16). doi:10.1002/adma.202518655
BibTeX
@article{Baeck2026,
author = {Baeck, Ki Heon and Song, Yong Bae and Kim, Dalyu and Jun, Seunggoo and Lim, Haechannara and Choi, Eugene and Kwon, Gakyung and Kim, Hae-Yong and Oh, Kyeong-Seok and Han, Sun-Phil and Lee, Sang-Young and Yoon, Hana and Nam, Kyung-Wan and Lee, Yun Seog and Jung, Yoon Seok},
title = {Chemo‐Mechanical Failure and Reinforcement of Solid Electrolyte Films for Practical All‐Solid‐State Li Metal Pouch Cells},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {16},
doi = {10.1002/adma.202518655}
}
EUVIMED