Precise Morphology Control via Backbone‐Derived Solid Additive Enables Binary Organic Solar Cells to Achieve 20% Efficiency and Thick‐Film Compatibility
Advanced Materials · 2026-02 · 38 (8)
DOI: 10.1002/adma.202518516 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 26.11.2025. Verfasst von Lu Wei und 16 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Organosilicon Chemistry and Materials Technology of Ministry of Education, College of Material, Chemistry and Chemical Engineering,…. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: Hangzhou Normal University, National Natural Science Foundation of China, Natural Science Foundation of Zhejiang Province.
Abstract (Originalsprache)
Precise control of active layer morphology is essential for advancing organic solar cells (OSCs) toward practical applications. Here, a generalizable morphology regulation strategy is proposed using a structurally tailored crystallization template derived from the polymer donor backbone. A small molecule, BDD‐C6, is designed by extracting the benzodithiophene (BDD) unit from PM6 and appending an alkylated thiophene terminal. When incorporated into PM6:L8‐BO and PM6:BTP‐eC9 binary blends, compatibility studies and cross‐sectional absorption analysis reveal a favorable vertical phase distribution on alcohol‐soluble substrates. Thermodynamic evaluations confirm the good thermal stability and crystallinity of BDD‐C6. Crystallization kinetics and morphological characterizations investigations further show that BDD‐C6 delays film formation and promotes polymer ordering, thus extending exciton diffusion length. As a result, PM6:L8‐BO‐based binary device delivers a power conversion efficiency (PCE) of 19.81% in thin films and maintains a PCE of 16.93% even at a 400 nm thickness. Moreover, PM6:BTP‐eC9‐based OSCs present an efficiency of over 20%. Extending this strategy to D18 systems using a DTBT‐C6 small molecule similarly enhances morphology and device performance, realizing a PCE of 20.18% in D18:L8‐BO binary device. This work offers a backbone‐derived crystallization template strategy for the scalable fabrication of high‐efficiency OSCs
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Organosilicon Chemistry and Materials Technology of Ministry of Education, College of Material, Chemistry and Chemical Engineering, Hangzhou Normal University, Hangzhou, 311121, P. R. China.
- State Key Laboratory of Silicon and Advanced Semiconductor Materials, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, 310027, P. R. China.
- Hoffmann Institute of Advanced Materials, Shenzhen Polytechnic University, Shenzhen, 518055, P. R. China.
- The Institute for Advanced Studies, Wuhan University, Wuhan, 430072, P. R. China.
- The Hong Kong University of Science and Technology (Guangzhou), Function Hub, Advanced Materials Thrust, Nansha, Guangzhou, 511400, P. R. China.
- College of New Materials and New Energies, Shenzhen Technology University, Shenzhen, 518118, P. R. China.
ORCID-Profile: Lingling Zhan
Förderung
- Hangzhou Normal University
- National Natural Science Foundation of China
- Natural Science Foundation of Zhejiang Province
Zitieren
APA
Wei, L., Zhan, L., Yang, Y., Chen, T., Yu, J., Sun, X., Hu, H., Sun, R., Min, J., Li, Y., Wu, J., Che, J., Zhang, G., Zhang, J., Li, Y., Yin, S., & Chen, H. (2026). Precise Morphology Control via Backbone‐Derived Solid Additive Enables Binary Organic Solar Cells to Achieve 20% Efficiency and Thick‐Film Compatibility. Advanced Materials, 38(8). https://doi.org/10.1002/adma.202518516
Vancouver
Wei L, Zhan L, Yang Y, Chen T, Yu J, Sun X, et al. Precise Morphology Control via Backbone‐Derived Solid Additive Enables Binary Organic Solar Cells to Achieve 20% Efficiency and Thick‐Film Compatibility. Advanced Materials. 2026;38(8). doi:10.1002/adma.202518516
BibTeX
@article{Wei2026,
author = {Wei, Lu and Zhan, Lingling and Yang, Yaxin and Chen, Tianyi and Yu, Jinyang and Sun, Xiaokang and Hu, Hanlin and Sun, Rui and Min, Jie and Li, Yao and Wu, Jiaying and Che, Jiaxu and Zhang, Guangye and Zhang, Jinzhi and Li, Yun and Yin, Shouchun and Chen, Hongzheng},
title = {Precise Morphology Control via Backbone‐Derived Solid Additive Enables Binary Organic Solar Cells to Achieve 20% Efficiency and Thick‐Film Compatibility},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {8},
doi = {10.1002/adma.202518516}
}
EUVIMED