Unraveling In‐Plane Crystallographic Anisotropy‐Dependent Memory Performance In Van Der Waals α‐In 2 Se 3 Ferroelectric Semiconductor Field‐Effect Transistors
Advanced Materials · 2026-02 · 38 (7)
DOI: 10.1002/adma.202517849 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 20.11.2025. Verfasst von Jong-Hyun Kim und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Semiconductor Systems Engineering, Korea University, 145, Anam-ro, Seongbuk-gu, Seoul, 02841, South Korea. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 78 Literaturangaben. Gefördert von: Technology Innovation Program, Ministry of Science and ICT, Ministry of Science and ICT, South Korea.
Abstract (Originalsprache)
The ferroelectric semiconductor field‐effect transistors (FeS‐FETs) based on α‐In 2 Se 3 emerge as promising non‐volatile memory devices. However, the intrinsic in‐plane (IP) crystallographic anisotropy of α‐In 2 Se 3 introduces orientation dependence, leading to pronounced variations in memory performance depending on the IP alignment of the source/drain (S/D) contacts. This study presents the first demonstration of IP anisotropy‐dependent ferroelectricity in α‐In 2 Se 3 FeS‐FETs with S/D contacts aligned along the armchair (AC) and zigzag (ZZ) directions. The AC‐aligned S/D configuration achieves a ferroelectric resistance switching (FRS) ratio of 6.42, an on/off current ratio of 4.53 × 10 4 , and a normalized memory window (MW) of 59 %, whereas the ZZ‐aligned counterpart exhibits an FRS ratio of 1.05, an on/off ratio of 5.25, and negligible MW. The electron transports proceed through twisted pathways along the AC direction, but proceed along a straight trajectory in the ZZ direction to avoid high‐energy barrier regions due to the threefold rotational symmetric lattice. Thus, the excessive electron transmission and a reduced Schottky barrier height effectively screen the influence of ferroelectric bound charges in the ZZ‐aligned S/D contacts. These findings establish clear correlations between IP anisotropy and the ferroelectric functionality of α‐In 2 Se 3 , offering critical guidelines for the design of FeS‐FETs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Semiconductor Systems Engineering, Korea University, 145, Anam-ro, Seongbuk-gu, Seoul, 02841, South Korea.
- School of Electronics and Computer Engineering, Chonnam National University, Gwangju, 61186, SouthKorea.
- School of Electrical Engineering, Korea University, 145, Anam-ro, Seongbuk-gu, Seoul, 02841, South Korea.
- Department of Electrical and Computer Engineering, University of Texas at Austin, 10100 Burnet Rd. Bldg 160, Austin, TX, 78758, USA.
ORCID-Profile: Hyun-Yong Yu
Förderung
- Technology Innovation Program
- Ministry of Science and ICT
- Ministry of Science and ICT, South Korea
Zitieren
APA
Kim, J. H., Kim, S. H., Jin, H. K., Akinwande, D., & Yu, H. Y. (2026). Unraveling In‐Plane Crystallographic Anisotropy‐Dependent Memory Performance In Van Der Waals α‐In 2 Se 3 Ferroelectric Semiconductor Field‐Effect Transistors. Advanced Materials, 38(7). https://doi.org/10.1002/adma.202517849
Vancouver
Kim JH, Kim SH, Jin HK, Akinwande D, Yu HY. Unraveling In‐Plane Crystallographic Anisotropy‐Dependent Memory Performance In Van Der Waals α‐In 2 Se 3 Ferroelectric Semiconductor Field‐Effect Transistors. Advanced Materials. 2026;38(7). doi:10.1002/adma.202517849
BibTeX
@article{Kim2026,
author = {Kim, Jong-Hyun and Kim, Seung-Hwan and Jin, Hyeong-Kyu and Akinwande, Deji and Yu, Hyun-Yong},
title = {Unraveling In‐Plane Crystallographic Anisotropy‐Dependent Memory Performance In Van Der Waals α‐In 2 Se 3 Ferroelectric Semiconductor Field‐Effect Transistors},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {7},
doi = {10.1002/adma.202517849}
}
EUVIMED