4D‐Printed Dual‐Functional Hydrogels Breaking the Trade‐Off Between Rapid Kinetics and Ultrahigh Water Uptake for Atmospheric Water Harvesting
Advanced Materials · 2026-02 · 38 (10)
DOI: 10.1002/adma.202516698 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 30.12.2025. Verfasst von Jianyong Yu und 8 weiteren Autor:innen. Beteiligte Einrichtung: Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, P. R. China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 49 Literaturangaben.
Abstract (Originalsprache)
Sorption‐based Atmospheric Water Harvesting (AWH) is an innovative approach to mitigate global freshwater scarcity. However, there is a trade‐off between rapid kinetics and ultrahigh water uptake, which is a formidable challenge in designing sorbent materials. Herein, 4D printed dual‐functional hydrogel is constructed through the collaborative design of molecular‐scale dynamic response network and macro‐scale structure. The 4D dual‐functional hydrogel integrates thermoresponsive (PNIPAM) and zwitterionic (PDMPAS) to form dynamic response networks, and is loaded with polypyrrole (PPY) and lithium chloride (4D TZG‐PPY‐LiCl). Simultaneously, 4D TZG‐PPY‐LiCl utilizes an abundant air‐sorbent interface to accelerate moisture absorption kinetics, exhibiting a large swelling ratio under humidity stimulation to capture more water. The moisture absorption rate and water uptake of 4D TZG‐PPY‐LiCl are double those of bulk TZG‐PPY‐LiCl between 30% and 90% RH, exhibiting an ultrahigh water uptake of 1.62–6.85 g g −1 , which is superior to that of the state‐of‐the‐art sorbents. In addition, the excellent photothermal conversion of 4D TZG‐PPY‐LiCl induces a hydrophilic to hydrophobic transition and structural shrinkage under one‐sun illumination, facilitating rapid water release. Furthermore, 4D TZG‐PPY‐LiCl AWH device has been further constructed, enabling continuous freshwater production. This breakthrough provides a new idea for the development of sorbent materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, P. R. China.
- School of Materials Science and Engineering, Harbin Institute of Technology at Weihai, Weihai, P. R. China.
- Department of Ocean Engineering, Harbin Institute of Technology at Weihai, Weihai, P. R. China.
- College of-Mechanical and Electrical Engineering, Shaanxi University of Science and Technology, Xi'an, P. R. China.
- School of Materials Science & Engineering, Beijing Institute of Technology, Beijing, China.
- Yangtze Delta Region Academy in Jiaxing, Beijing Institute of Technology, JiaXing, P. R. China.
ORCID-Profile: Jianyong Yu, Meng An, Yanju Liu, Jinsong Leng
Zitieren
APA
Yu, J., Xie, F., Gong, X., Chen, D., Niu, Y., Ping, Z., An, M., Liu, Y., & Leng, J. (2026). 4D‐Printed Dual‐Functional Hydrogels Breaking the Trade‐Off Between Rapid Kinetics and Ultrahigh Water Uptake for Atmospheric Water Harvesting. Advanced Materials, 38(10). https://doi.org/10.1002/adma.202516698
Vancouver
Yu J, Xie F, Gong X, Chen D, Niu Y, Ping Z, et al. 4D‐Printed Dual‐Functional Hydrogels Breaking the Trade‐Off Between Rapid Kinetics and Ultrahigh Water Uptake for Atmospheric Water Harvesting. Advanced Materials. 2026;38(10). doi:10.1002/adma.202516698
BibTeX
@article{Yu2026,
author = {Yu, Jianyong and Xie, Fang and Gong, Xiaobo and Chen, Dongsheng and Niu, Yao and Ping, Zhongxin and An, Meng and Liu, Yanju and Leng, Jinsong},
title = {4D‐Printed Dual‐Functional Hydrogels Breaking the Trade‐Off Between Rapid Kinetics and Ultrahigh Water Uptake for Atmospheric Water Harvesting},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {10},
doi = {10.1002/adma.202516698}
}
EUVIMED