EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D‐Printable, Honeycomb‐Inspired Tissue‐Like Bioelectrodes for Patient‐Specific Neural Interface

Marzia Momin, Luyi Feng, Xiaoai Chen, Salahuddin Ahmed, Basma AlMahmood, Li-Pang Huang, Jiashu Ren, Xinyi Wang, Hyunjin Lee, Samuel R Cramer, Nanyin Zhang, Sulin Zhang und 1 weitere

Advanced Materials · 2026-06 · 38 (31)

DOI: 10.1002/adma.202516291 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 14.03.2026. Verfasst von Marzia Momin und 12 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, Pennsylvania, USA. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Brain-Computer Interfaces, Biomimetic Materials. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NHLBI NIH HHS, National Taipei University of Technology-Penn State Collaborative Seed Grant Program, NIH HHS.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The unique gyral patterns of the human brain demand patient‐specific neural interfaces to achieve precise neuromodulation, mitigate adverse tissue responses, and optimize therapeutic efficacy and safety. One‐size‐fits‐all, conventional rigid electrocorticography (ECoG) electrodes, standardized for mass production through lithographic techniques, exhibit limited conformability to the brain's heterogeneous cortical topography. This mechanical mismatch results in poor electrode‐tissue contact, signal loss, and foreign body responses. To address these limitations, we present an integrated novel platform, synergizing MRI‐based anatomical mapping, finite element analysis (FEA)—optimized mechanical design, and direct ink writing (DIW) 3D printing to fabricate electrodes customized to individual gyral patterns. The resulting honeycomb‐inspired printable gel electrode (HiPGE) employs a bioinspired honeycomb architecture with ultra‐soft hydrogels, engineered to match the bending stiffness of brain tissue (0.1–10 kPa) while maintaining cost‐efficiency and long‐term durability. This mechanical congruence ensures exceptional cortical conformability and adaptive interfacing, circumventing the geometric and material limitations of traditional rigid electrodes. By combining patient‐specific design with scalable fabrication, our platform establishes a transformative framework for neural interface engineering, enhancing precision, biocompatibility, and functional performance in neuromodulation therapies and neuroprosthetic applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalBrain-Computer InterfacesBiomimetic MaterialsHumansFinite Element AnalysisBrainElectrodesHydrogelsElectrocorticographyMagnetic Resonance Imaging

Stichwörter der Autor:innen

3D printingECoGbioinspiredbrain‐computer interfaceneural interfacepatient‐specificsoft electrodes

Substanzen

Hydrogels

Autor:innen und Institutionen

  • Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, Pennsylvania, USA.
  • Department of Biomedical Engineering, The Pennsylvania State University, University Park, Pennsylvania, USA.
  • Department of Physics, The Pennsylvania State University, University Park, Pennsylvania, USA.
  • Department of Biology, The Pennsylvania State University, University Park, Pennsylvania, USA.
  • Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania, USA.
  • Center For Neural Engineering, The Pennsylvania State University, University Park, Pennsylvania, USA.

ORCID-Profile: Tao Zhou

Förderung

  • NHLBI NIH HHS
  • National Taipei University of Technology-Penn State Collaborative Seed Grant Program
  • NIH HHS
  • National Science Foundation
  • National Institutes of Health

Zitieren

APA

Momin, M., Feng, L., Chen, X., Ahmed, S., AlMahmood, B., Huang, L. P., Ren, J., Wang, X., Lee, H., Cramer, S. R., Zhang, N., Zhang, S., & Zhou, T. (2026). 3D‐Printable, Honeycomb‐Inspired Tissue‐Like Bioelectrodes for Patient‐Specific Neural Interface. Advanced Materials, 38(31). https://doi.org/10.1002/adma.202516291

Vancouver

Momin M, Feng L, Chen X, Ahmed S, AlMahmood B, Huang LP, et al. 3D‐Printable, Honeycomb‐Inspired Tissue‐Like Bioelectrodes for Patient‐Specific Neural Interface. Advanced Materials. 2026;38(31). doi:10.1002/adma.202516291

BibTeX
@article{Momin2026,
  author = {Momin, Marzia and Feng, Luyi and Chen, Xiaoai and Ahmed, Salahuddin and AlMahmood, Basma and Huang, Li-Pang and Ren, Jiashu and Wang, Xinyi and Lee, Hyunjin and Cramer, Samuel R and Zhang, Nanyin and Zhang, Sulin and Zhou, Tao},
  title = {3D‐Printable, Honeycomb‐Inspired Tissue‐Like Bioelectrodes for Patient‐Specific Neural Interface},
  journal = {Advanced Materials},
  year = {2026},
  volume = {38},
  number = {31},
  doi = {10.1002/adma.202516291}
}
Kostenlos starten →