Molecular Surface Engineering of Sulfide Electrolytes with Enhanced Humidity Tolerance for Robust Lithium Metal All‐Solid‐State Batteries
Advanced Materials · 2026-02 · 38 (9)
DOI: 10.1002/adma.202515013 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 16.12.2025. Verfasst von Laras Fadillah und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, University of Fribourg, Fribourg, 1700, Switzerland. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung.
Abstract (Originalsprache)
Solid‐state electrolytes (SSEs) enable next‐generation batteries due to their intrinsic safety and compatibility with lithium (Li) metal anodes. However, many SSEs, particularly sulfide‐based systems, suffer from limited electrochemical stability and high moisture sensitivity. Here, the molecular surface engineering of Li argyrodite SSE, Li 6 PS 5 Cl 0.5 Br 0.5 (LPSClBr), is reported using octadecyl phosphonic acid (OPA) and its lithiated form (Li‐OPA) in a single‐step coating strategy to stabilize both anode and cathode interfaces. The Li‐OPA‐coated electrolyte maintains high ionic conductivity (>2.5 mS cm −1 ) and retains >92% of its initial conductivity after 24 h dry room exposure (dew point −50 °C). At 2 wt.% loading, Li‐OPA‐coated LPSClBr achieves a critical current density of 2.4 mA cm −1 and supports stable Li plating/stripping for over 400 h at 1.0 mAh cm −2 . In NCM811 cathode‐based all‐solid‐state cells, it delivers 160 mAh g −1 at 0.3 C with >99.7% Coulombic efficiency and 85% capacity retention after 100 cycles. In anode‐free cell configurations, Li‐OPA‐modified electrolytes enhance interfacial stability and cycling performance. These results demonstrate Li‐OPA as a scalable, high‐performance interfacial modifier for sulfide‐based solid‐state batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemistry, University of Fribourg, Fribourg, 1700, Switzerland.
- School of Chemical and Biological Engineering and Institute of Chemical Process, Seoul National University, Seoul, 08826, South Korea.
- Ecole Polytechnique Fédérale de Lausanne, Institute of Materials, Lausanne, 1015, Switzerland.
- École Polytechnique Fédérale de Lausanne, Institute of Chemical Sciences and Engineering (ISIC), Sion, 1950, Switzerland.
ORCID-Profile: Ali Coskun
Förderung
- National Research Foundation of Korea
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
Zitieren
APA
Fadillah, L., Braks, L., Oh, J., Liu, M., Türk, H., Tisi, D., Mensi, M., Ceriotti, M., Choi, J. W., & Coskun, A. (2026). Molecular Surface Engineering of Sulfide Electrolytes with Enhanced Humidity Tolerance for Robust Lithium Metal All‐Solid‐State Batteries. Advanced Materials, 38(9). https://doi.org/10.1002/adma.202515013
Vancouver
Fadillah L, Braks L, Oh J, Liu M, Türk H, Tisi D, et al. Molecular Surface Engineering of Sulfide Electrolytes with Enhanced Humidity Tolerance for Robust Lithium Metal All‐Solid‐State Batteries. Advanced Materials. 2026;38(9). doi:10.1002/adma.202515013
BibTeX
@article{Fadillah2026,
author = {Fadillah, Laras and Braks, Leonie and Oh, Jihoon and Liu, Mingliang and Türk, Hanna and Tisi, Davide and Mensi, Mounir and Ceriotti, Michele and Choi, Jang Wook and Coskun, Ali},
title = {Molecular Surface Engineering of Sulfide Electrolytes with Enhanced Humidity Tolerance for Robust Lithium Metal All‐Solid‐State Batteries},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {9},
doi = {10.1002/adma.202515013}
}
EUVIMED