EUVIMEDEUVIMED entdecken
Crossref

3D Printing High‐Performance Piezoelectric Ceramic with Complex Structure for Ultrasonic Array Transducer

Kun Zheng, Yi Quan, Weigang Ma, Jian Zhuang, Chunlong Fei, Jinyan Zhao, Yecheng Wang, Yajun Sun, Zimeng Shang, Qin Lian, Chenying Wang, Yifan Zhao und 4 weitere

Advanced Materials · 2026-01 · 38 (6)

DOI: 10.1002/adma.202514520 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 10.11.2025. Verfasst von Kun Zheng und 15 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Manufacturing Systems Engineering, School of Instrument Science and Technology, Xi'an Jiaotong University, Xi'an, 710049, Ch…. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 54 Literaturangaben. Gefördert von: China National Key R&D Program, Natural Science Foundation of China, Xidian University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D printing has demonstrated irreplaceable advantages on rapid prototyping and flexible shaping of piezoelectric ceramic fabrication. However, several factors such as microstructure, densification, inferior electrical properties, and practical device design, significantly limit the applications of 3D‐printed piezoelectric ceramics. In this work, a method of utilizing the digital light processing technique to manufacture high‐performance piezoelectric Sm‐PMN‐PT ceramics with complex geometries for devices application is realized. The piezoelectric coefficient d 33 of 1285 pC N −1 is achieved, which represents the highest value reported to date among all 3D‐printed piezoelectric ceramics. Furthermore, an ultrasonic transducer annular array, which is challenging to achieve using traditional manufacture techniques, is designed and fabricated through 3D printing. The transducer demonstrates exceptional performance with a large bandwidth of 60%, a high peak‐to‐peak voltage of 952 mV, and improved imaging resolutions. Notably, the superior performance establishes a new benchmark in the achievable device level for 3D‐printed ultrasonic transducers. These results highlight the significant potential of 3D‐printed piezoelectric ceramics and complex structures on devices, showcasing their capability to fulfill specific needs and requirements.

Schlagwörter

Stichwörter der Autor:innen

3D printingcuring propertiesparticle sizepiezoelectric ceramicultrasonic annular array transducer

Autor:innen und Institutionen

  • State Key Laboratory for Manufacturing Systems Engineering, School of Instrument Science and Technology, Xi'an Jiaotong University, Xi'an, 710049, China.
  • Faculty of Integrated Circuit, Xidian University, Xi'an, 710071, China.
  • State Key Laboratory for Manufacturing Systems Engineering, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, 710049, China.
  • State Key Laboratory for Manufacturing Systems Engineering, Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education & International Center for Dielectric Research, School of Electronic Scie…

ORCID-Profile: Wei Ren

Förderung

  • China National Key R&D Program
  • Natural Science Foundation of China
  • Xidian University
  • 111 Project" of China
  • National Natural Science Foundation of China

Zitieren

APA

Zheng, K., Quan, Y., Ma, W., Zhuang, J., Fei, C., Zhao, J., Wang, Y., Sun, Y., Shang, Z., Lian, Q., Wang, C., Zhao, Y., Han, F., Yang, Y., Jiang, Z., & Ren, W. (2026). 3D Printing High‐Performance Piezoelectric Ceramic with Complex Structure for Ultrasonic Array Transducer. Advanced Materials, 38(6). https://doi.org/10.1002/adma.202514520

Vancouver

Zheng K, Quan Y, Ma W, Zhuang J, Fei C, Zhao J, et al. 3D Printing High‐Performance Piezoelectric Ceramic with Complex Structure for Ultrasonic Array Transducer. Advanced Materials. 2026;38(6). doi:10.1002/adma.202514520

BibTeX
@article{Zheng2026,
  author = {Zheng, Kun and Quan, Yi and Ma, Weigang and Zhuang, Jian and Fei, Chunlong and Zhao, Jinyan and Wang, Yecheng and Sun, Yajun and Shang, Zimeng and Lian, Qin and Wang, Chenying and Zhao, Yifan and Han, Feng and Yang, Yintang and Jiang, Zhuangde and Ren, Wei},
  title = {3D Printing High‐Performance Piezoelectric Ceramic with Complex Structure for Ultrasonic Array Transducer},
  journal = {Advanced Materials},
  year = {2026},
  volume = {38},
  number = {6},
  doi = {10.1002/adma.202514520}
}
Kostenlos starten →