EUVIMEDEUVIMED entdecken
Crossref

Sub‐Melt Consolidation of Aerospace‐Grade Thermoplastic Composites for High‐Rate Processing

Joseph G Kirchhoff, Saeed Khaleghi iD, Greg Haugstad, Tyler B Hudson, Mehran Tehrani iD

Advanced Materials · 2026-02 · 38 (9)

DOI: 10.1002/adma.202514390 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 14.12.2025. Verfasst von Joseph G Kirchhoff und 4 weiteren Autor:innen. Beteiligte Einrichtung: Walker Department of Mechanical Engineering, University of Texas at Austin, Austin, TX, 78712, USA. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: Office of Naval Research, National Aeronautics and Space Administration (NASA), National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The processing of thermoplastic composites is often limited by high energy demands and slow cycle times. Out‐of‐autoclave amorphous/crystalline thermoplastic materials for energy‐efficient aerospace‐grade laminates (OATMEAL) addresses these challenges through a unique prepreg architecture. OATMEAL consists of slow‐cooled carbon fiber‐reinforced semicrystalline polyetheretherketone (PEEK) tape sheathed in thin amorphous polyetherimide (PEI) layers. The PEI sheaths are miscible with PEEK and enable interfacial healing below the melting point of PEEK—preserving pre‐existing crystallinity and reducing processing temperatures by 80 °C. The sheaths are thinned via high‐frequency laser ablation down to the PEEK–PEI blending regions, thereby reducing residual stresses and promoting chemical resistance. Fast‐cooled vacuum‐bag‐only oven processing of OATMEAL laminates yields aerospace‐quality parts while enabling processing speeds more than five times faster and reducing energy use by roughly 75% compared with conventional methods. These results represent a significant advancement and a step toward truly high‐rate, large‐scale aerostructure manufacturing.

Schlagwörter

Stichwörter der Autor:innen

amorphous crystalline blendsenergy‐efficient processinglaser ablationthermoplastic composites

Autor:innen und Institutionen

  • Walker Department of Mechanical Engineering, University of Texas at Austin, Austin, TX, 78712, USA.
  • Department of Structural Engineering, University of California San Diego, La Jolla, CA, 92093, USA.
  • Characterization Facility, University of Minnesota, Minneapolis, MN, 55455, USA.
  • Advanced Materials and Processing Branch, NASA Langley Research Center, Hampton, VA, 23681, USA.
  • Program in Materials Science and Engineering, University of California San Diego, La Jolla, CA, 92093, USA.

ORCID-Profile: Saeed Khaleghi, Mehran Tehrani

Förderung

  • Office of Naval Research
  • National Aeronautics and Space Administration (NASA)
  • National Science Foundation

Zitieren

APA

Kirchhoff, J. G., Khaleghi, S., Haugstad, G., Hudson, T. B., & Tehrani, M. (2026). Sub‐Melt Consolidation of Aerospace‐Grade Thermoplastic Composites for High‐Rate Processing. Advanced Materials, 38(9). https://doi.org/10.1002/adma.202514390

Vancouver

Kirchhoff JG, Khaleghi S, Haugstad G, Hudson TB, Tehrani M. Sub‐Melt Consolidation of Aerospace‐Grade Thermoplastic Composites for High‐Rate Processing. Advanced Materials. 2026;38(9). doi:10.1002/adma.202514390

BibTeX
@article{Kirchhoff2026,
  author = {Kirchhoff, Joseph G and Khaleghi, Saeed and Haugstad, Greg and Hudson, Tyler B and Tehrani, Mehran},
  title = {Sub‐Melt Consolidation of Aerospace‐Grade Thermoplastic Composites for High‐Rate Processing},
  journal = {Advanced Materials},
  year = {2026},
  volume = {38},
  number = {9},
  doi = {10.1002/adma.202514390}
}
Kostenlos starten →