Simultaneous Interfacial Defect Passivation and Free‐Volume Reduction by Fluorinated Hole Transport Materials for High‐Performance Perovskite Solar Cells
Advanced Materials · 2026-01 · 38 (1)
DOI: 10.1002/adma.202513884 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 12.09.2025. Verfasst von Yifan Xing und 13 weiteren Autor:innen. Beteiligte Einrichtung: Ministry of Education Key Laboratory of Interface Science and Engineering in Advanced Materials, Taiyuan University of Technology, Taiyuan, Shanxi, 0…. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 58 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shanxi Province, Shaanxi Provincial Science Fund for Distinguished Young Scholars.
Abstract (Originalsprache)
Interfacial defects and free‐volume between the perovskite layer and hole transport material (HTM) critically impact the efficiency and stability of perovskite solar cells (PSCs). In this work, the interfacial issues of the PSCs are addressed by strategically modulating the fluorine distribution in N,N ′‐bicarbazole (BCz)‐based HTMs, specifically, fluorine is introduced either asymmetrically and symmetrically on the peripheral groups, yielding AdF‐BCz and SdF‐BCz, respectively. Through a combination of experimental characterization and atomistic molecular dynamics simulations, it is demonstrated that AdF‐BCz exhibits superior interfacial passivation stability against Pb 2+ and I – related defects, as well as stronger adhesion to the perovskite surface compared to the fluorine‐free NF‐BCz and symmetrically substituted SdF‐BCz. Moreover, AdF‐BCz reduces interfacial free‐volume, promotes more intimate contact at the interface, and enhances the suppression of ion migration and perovskite degradation. Consequently, the PSCs fabricated with AdF‐BCz achieved a notable efficiency of 25.35%, outperforming devices based on SdF‐BCz (23.12%) and NF‐BCz (24.2%). Furthermore, unencapsulated AdF‐BCz based PSCs exhibit respectable stability, retaining 97% of their initial efficiencies after 2000 h under 30% relative humidity and 82% after 300 h of continuous heating at 85 °C.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Ministry of Education Key Laboratory of Interface Science and Engineering in Advanced Materials, Taiyuan University of Technology, Taiyuan, Shanxi, 030024, P. R. China.
- Key Laboratory of Applied Surface and Colloid Chemistry Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineering Lab for Advanced Energy Technology School of Materials Science and E…
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, Liaoning, 110016, P. R. China.
ORCID-Profile: Kunpeng Guo
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Shanxi Province
- Shaanxi Provincial Science Fund for Distinguished Young Scholars
Zitieren
APA
Xing, Y., Li, Z., Li, Y., Wu, M., Jia, Y., Guo, K., Zhang, Z., Zhou, J., Luo, Y., Qiu, J., Dong, L., Xie, T., Zhao, S., & Liu, Z. (2026). Simultaneous Interfacial Defect Passivation and Free‐Volume Reduction by Fluorinated Hole Transport Materials for High‐Performance Perovskite Solar Cells. Advanced Materials, 38(1). https://doi.org/10.1002/adma.202513884
Vancouver
Xing Y, Li Z, Li Y, Wu M, Jia Y, Guo K, et al. Simultaneous Interfacial Defect Passivation and Free‐Volume Reduction by Fluorinated Hole Transport Materials for High‐Performance Perovskite Solar Cells. Advanced Materials. 2026;38(1). doi:10.1002/adma.202513884
BibTeX
@article{Xing2026,
author = {Xing, Yifan and Li, Zhijun and Li, Yongzhe and Wu, Meizi and Jia, Yixin and Guo, Kunpeng and Zhang, Zheng and Zhou, Jinpeng and Luo, Yang and Qiu, Jianhang and Dong, Linlin and Xie, Tianyou and Zhao, Shikai and Liu, Zhike},
title = {Simultaneous Interfacial Defect Passivation and Free‐Volume Reduction by Fluorinated Hole Transport Materials for High‐Performance Perovskite Solar Cells},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {1},
doi = {10.1002/adma.202513884}
}
EUVIMED