Tailoring Point Defects to Enhance Thermoelectric Performance in AgCuTe‐Based Compounds
Advanced Materials · 2026-02 · 38 (11)
DOI: 10.1002/adma.202513610 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 02.01.2026. Verfasst von Nan-Hai Li und 10 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry and Physics and Centre for Materials Science, ARC Research Hub in Zero-emission Power Generation for Carbon Neutrality, Queenslan…. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 67 Literaturangaben. Gefördert von: Australian Research Council, QUT Capacity Building Professor Program.
Abstract (Originalsprache)
Crystalline solids with intrinsically low lattice thermal conductivity are essential for advancing high‐performance thermoelectric materials. Superionic conductor AgCuTe exhibits inherently low lattice thermal conductivity and exceptional tunability in both electronic and phononic transport, making it a promising candidate for medium‐temperature thermoelectric applications. However, its practical deployment remains limited by suboptimal performance and insufficient optimization strategies. Here, we report a substantially enhanced dimensionless figure of merit ( ZT ) of ∼1.72 at 773 K in p‐type polycrystalline AgCuTe through a systematic point defects engineering strategy. Guided by mass and strain field fluctuation criteria for suppressing lattice thermal conductivity, sulfur is identified as an effective dopant. Subsequent introduction of cation vacancies further synergizes electronic and thermal transport, yielding a high average ZT of 1.55 between 523–773 K, surpassing all previously reported values for AgCuTe. Moreover, a segmented single‐leg thermoelectric module combining this material with commercial p‐type (Bi, Sb) 2 Te 3 achieves a high energy conversion efficiency of ∼13.7% under a temperature gradient of ∼467 K. These results underscore the efficacy of point defects engineering in optimizing superionic conductors and highlight the strong potential of AgCuTe for practical thermoelectric applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Chemistry and Physics and Centre for Materials Science, ARC Research Hub in Zero-emission Power Generation for Carbon Neutrality, Queensland University of Technology, Brisbane, Queensland, Australia.
- Central Analytical Research Facility, Institute for Future Environments, Queensland University of Technology, Brisbane, Queensland, Australia.
ORCID-Profile: Zhi-Gang Chen
Förderung
- Australian Research Council
- QUT Capacity Building Professor Program
Zitieren
APA
Li, N. H., Shi, X. L., Zhang, C., Li, M., Wang, X. D., Pei, J., Zhang, M., Chen, W. Y., Golberg, D., Qi, D. C., & Chen, Z. G. (2026). Tailoring Point Defects to Enhance Thermoelectric Performance in AgCuTe‐Based Compounds. Advanced Materials, 38(11). https://doi.org/10.1002/adma.202513610
Vancouver
Li NH, Shi XL, Zhang C, Li M, Wang XD, Pei J, et al. Tailoring Point Defects to Enhance Thermoelectric Performance in AgCuTe‐Based Compounds. Advanced Materials. 2026;38(11). doi:10.1002/adma.202513610
BibTeX
@article{Li2026,
author = {Li, Nan-Hai and Shi, Xiao-Lei and Zhang, Chao and Li, Meng and Wang, Xiao Dong and Pei, Jun and Zhang, Min and Chen, Wen-Yi and Golberg, Dmitri and Qi, Dong-Chen and Chen, Zhi-Gang},
title = {Tailoring Point Defects to Enhance Thermoelectric Performance in AgCuTe‐Based Compounds},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {11},
doi = {10.1002/adma.202513610}
}
EUVIMED