Tailored Redox‐Active Catholytes Enabling High‐Rate and High‐Loading All‐Solid‐State Lithium‐Sulfur Batteries
Advanced Materials · 2026-03 · 38 (15)
DOI: 10.1002/adma.202513204 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 07.02.2026. Verfasst von Jingui Yang und 8 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Nanotechnology, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Federal Ministry of Research, Technology, and Space (BMFTR).
Abstract (Originalsprache)
All‐solid‐state lithium‐sulfur batteries (ASSLSBs) hold great promise for next‐generation electrochemical energy storage due to sulfur's high theoretical specific capacity and low cost. However, sluggish sulfur conversion kinetics and severe volume variations during cycling, as well as poor ionic percolation in composite cathodes, limit their practical viability. To overcome these challenges, we herein introduce solid electrolytes of nominal composition Li 10.5− x Si 1.5 P 1.5 S 12− x I x (with x = 0, 0.2, 0.4), possessing high ionic conductivities of ≥ 7 mS cm −1 at room temperature. We show that increasing iodine content alters the phase composition and triggers reversible redox activity in these materials. If implemented as catholytes, this enables very fast sulfur conversion kinetics, ultimately leading to ASSLSBs with exceptional performance. The cells achieve 86% sulfur utilization at a rate of C/2 and at 45°C and offer high‐rate capability by delivering 1175 mAh g sulfur −1 at 5C and 590 mAh g sulfur −1 at 15C. Furthermore, the synergistic effects of ionic percolation and redox‐activity enable record areal capacities up to 14 mAh cm −2 with a sulfur loading of 10 mg cm −2 . Taken together, our findings provide new strategies for designing redox‐active catholytes for application in advanced ASSLSBs and further strengthen the redox‐mediating role of iodine therein.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Nanotechnology, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany.
- Institute for Applied Materials-Energy Storage Systems, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany.
- Helmholtz Institute Ulm (HIU) Electrochemical Energy Storage, Ulm, Germany.
- Applied Chemistry and Engineering Research Centre of Excellence (ACER CoE), Universite Mohammed VI Polytechnique (UM6P), Ben Guerir, Morocco.
- Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany.
ORCID-Profile: Florian Strauss
Förderung
- German Federal Ministry of Research, Technology, and Space (BMFTR)
Zitieren
APA
Yang, J., Zhang, R., Zimmermanns, R., Schaller, M., Indris, S., Choi, J., Fleischmann, S., Brezesinski, T., & Strauss, F. (2026). Tailored Redox‐Active Catholytes Enabling High‐Rate and High‐Loading All‐Solid‐State Lithium‐Sulfur Batteries. Advanced Materials, 38(15). https://doi.org/10.1002/adma.202513204
Vancouver
Yang J, Zhang R, Zimmermanns R, Schaller M, Indris S, Choi J, et al. Tailored Redox‐Active Catholytes Enabling High‐Rate and High‐Loading All‐Solid‐State Lithium‐Sulfur Batteries. Advanced Materials. 2026;38(15). doi:10.1002/adma.202513204
BibTeX
@article{Yang2026,
author = {Yang, Jingui and Zhang, Ruizhuo and Zimmermanns, Ramon and Schaller, Mareen and Indris, Sylvio and Choi, Jaehoon and Fleischmann, Simon and Brezesinski, Torsten and Strauss, Florian},
title = {Tailored Redox‐Active Catholytes Enabling High‐Rate and High‐Loading All‐Solid‐State Lithium‐Sulfur Batteries},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {15},
doi = {10.1002/adma.202513204}
}
EUVIMED