EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Sustainable Liquid Metal Composites for Soft Electronics and E‐Waste Reduction

Abdollah Hajalilou iD, Elahe Parvini, Carmel Majidi

Advanced Materials · 2026-01 · 38 (5)

DOI: 10.1002/adma.202512968 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Advanced Materials, online erschienen am 19.11.2025. Verfasst von Abdollah Hajalilou und 2 weiteren Autor:innen. Beteiligte Einrichtung: CENIMAT|i3N, Department of Materials Science, School of Science and Technology, NOVA University Lisbon and CEMOP/UNINOVA, Campus de Caparica, Caparic…. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 541 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e a Tecnologia, Plano de Recuperação e Resiliência, Agenda Be.Neutral.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

There has been tremendous progress in soft printable electronics with liquid metal (LM) for creating elastic, stretchable, and thin‐film circuitry. However, such innovation risks outpacing sustainability. As the world moves toward softer, thinner, and more integrated electronics, these advancements may accelerate the exponential rise of electronic waste—projected to surpass 74 million tons by 2030 and reach ≈120 million tons by 2050. Therefore, in developing LM‐based electronics, it is critical to address the urgent need for eco‐friendly recycling strategies. This review proposes a paradigm shift toward recyclable, repairable, renewable, and resilient (“4R”) soft electronics enabled by LM composites. Gallium‐based alloys and their eutectics, such as Galinstan and EGaIn, offer a rare convergence of high conductivity, fluidic deformability, and recyclability—ideally suited for stretchable circuits, soft robotics, and wearables. Yet, their promise remains incomplete without scalable, eco‐friendly recovery methods. Advanced extraction and recycling approaches are examined, including mechanical–chemical and physicochemical methods using deep eutectic solvents (DESs) and ionic liquids for selective recovery with minimal environmental impact. Emphasis is placed on materials selection, substrate compatibility, and integration strategies that enable circular lifecycles. LM composites offer a path to redefine electronics—not only for performance but also for durability, self‐healing, and sustainability.

Schlagwörter

Stichwörter der Autor:innen

E‐waste reductioneco‐friendly recyclingliquid metal compositessoft electronicssustainable and self‐healable materials

Autor:innen und Institutionen

  • CENIMAT|i3N, Department of Materials Science, School of Science and Technology, NOVA University Lisbon and CEMOP/UNINOVA, Campus de Caparica, Caparica, 2829-516, Portugal.
  • Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra, Coimbra, 3030-290, Portugal.
  • Integrated Soft Materials Lab, Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, PA, 15213, USA.

ORCID-Profile: Abdollah Hajalilou

Förderung

  • Fundação para a Ciência e a Tecnologia
  • Plano de Recuperação e Resiliência
  • Agenda Be.Neutral

Zitieren

APA

Hajalilou, A., Parvini, E., & Majidi, C. (2026). Sustainable Liquid Metal Composites for Soft Electronics and E‐Waste Reduction. Advanced Materials, 38(5). https://doi.org/10.1002/adma.202512968

Vancouver

Hajalilou A, Parvini E, Majidi C. Sustainable Liquid Metal Composites for Soft Electronics and E‐Waste Reduction. Advanced Materials. 2026;38(5). doi:10.1002/adma.202512968

BibTeX
@article{Hajalilou2026,
  author = {Hajalilou, Abdollah and Parvini, Elahe and Majidi, Carmel},
  title = {Sustainable Liquid Metal Composites for Soft Electronics and E‐Waste Reduction},
  journal = {Advanced Materials},
  year = {2026},
  volume = {38},
  number = {5},
  doi = {10.1002/adma.202512968}
}
Kostenlos starten →