EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Quasi‐Solid Cathode Additive Enables Highly Reversible Four‐Electron I − /I 0 /I + Conversion in Aqueous Zn‐I 2 Batteries

Han Wu iD, Shao-Jian Zhang, Jitraporn Vongsvivut, Yunling Jiang, Junnan Hao, Shi-Zhang Qiao iD

Advanced Materials · 2026-01 · 38 (3)

DOI: 10.1002/adma.202511680 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, 2025-10. Verfasst von Han Wu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering, The University of Adelaide, Adelaide, South Australia, 5005, Australia. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Australian Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aqueous zinc‐iodine (Zn‐I 2 ) batteries with four‐electron (4e) I − /I 0 /I + conversion (4eZIBs) offer high energy density but face both‐step I − /I 0 and I 0 /I + challenges, including the polyiodide shuttle effect, sluggish I 0 /I + conversion kinetics, and severe I + hydrolysis. To mitigate these issues, a quasi‐solid additive composed of 1‐butyl‐3‐methylimidazolium chloride (BMICl) and carbon nanotubes (CNTs) is introduced into the cathode. Specifically, by co‐grinding BMICl with CNTs, a homogeneous quasi‐solid additive is formed due to the π – π stacking interactions between CNTs and imidazole rings. This additive not only suppresses the shuttle effect by binding with polyiodides in the first‐step I − /I 0 conversion, but also enhances I + conversion kinetics by immobilizing Cl − inside the electrode and curbs I + hydrolysis through forming a BMI‐ICl 2 complex in the second‐step conversion. This innovative approach enables the 4eZIBs to achieve a near‐theoretical specific capacity of 418.9 mA h g −1 at 0.5C, while maintaining a robust lifespan of over 600 cycles with a capacity retention of 93.4% at 1C. Moreover, pouch cells under a high areal capacity of 7.1 mA h cm −2 for each side of the cathode demonstrate a high‐capacity retention of 95.8% after 150 cycles at 6.3 mA cm −2 (≈0.5C).

Schlagwörter

Stichwörter der Autor:innen

I+ hydrolysisfour‐electron conversionpolyiodidesshuttle‐free batteriesstatic aqueous Zn‐I2 battery

Autor:innen und Institutionen

  • School of Chemical Engineering, The University of Adelaide, Adelaide, South Australia, 5005, Australia.
  • Infrared Microspectroscopy (IRM) Beamline, ANSTO-Australian Synchrotron, Clayton, Victoria, 3168, Australia.

ORCID-Profile: Han Wu, Shi-Zhang Qiao

Förderung

  • Australian Research Council

Zitieren

APA

Wu, H., Zhang, S. J., Vongsvivut, J., Jiang, Y., Hao, J., & Qiao, S. Z. (2026). Quasi‐Solid Cathode Additive Enables Highly Reversible Four‐Electron I − /I 0 /I + Conversion in Aqueous Zn‐I 2 Batteries. Advanced Materials, 38(3). https://doi.org/10.1002/adma.202511680

Vancouver

Wu H, Zhang SJ, Vongsvivut J, Jiang Y, Hao J, Qiao SZ. Quasi‐Solid Cathode Additive Enables Highly Reversible Four‐Electron I − /I 0 /I + Conversion in Aqueous Zn‐I 2 Batteries. Advanced Materials. 2026;38(3). doi:10.1002/adma.202511680

BibTeX
@article{Wu2026,
  author = {Wu, Han and Zhang, Shao-Jian and Vongsvivut, Jitraporn and Jiang, Yunling and Hao, Junnan and Qiao, Shi-Zhang},
  title = {Quasi‐Solid Cathode Additive Enables Highly Reversible Four‐Electron I − /I 0 /I + Conversion in Aqueous Zn‐I 2 Batteries},
  journal = {Advanced Materials},
  year = {2026},
  volume = {38},
  number = {3},
  doi = {10.1002/adma.202511680}
}
Kostenlos starten →