Operando Neutron Imaging of Lithium Flux and Gradient Cathode Design for Enhanced Kinetics in High‐Loading All‐Solid‐State Li─S Batteries
Advanced Materials · 2026-01 · 38 (5)
DOI: 10.1002/adma.202511553 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 25.10.2025. Verfasst von Cheng Xu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Industrial Engineering, Northeastern University, Boston, MA, 02115, USA. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: Office of Science in the Department of Energy.
Abstract (Originalsprache)
All‐solid‐state Li–sulfur batteries (ASSLSBs) are considered promising candidates for next‐generation energy storage owing to their inherent safety, high energy density, and abundant sulfur resources. However, slow redox kinetics greatly limit sulfur utilization during solid‐solid sulfur reactions, leading to significant challenges to achieve efficient performance in high‐mass‐loading ASSLSBs. Here, operando neutron image is employed to directly visualize, for the first time, that sluggish Li + transport kinetics and the uneven distribution of Li + during cathodic reactions are critical factors limiting sulfur conversion. To address this issue, gradient cathode architectures comprising three and five layers are designed, in which catholyte concentrations are strategically varied to optimize Li‐ion flux and enhance ionic conductivity of the whole composite cathode electrode. Operando neutron imaging distinctly visualizes and confirms that three‐layer gradient approach significantly enhances Li‐ion mobility, resulting in more uniform redox reactions and greatly improved sulfur utilization compared to traditional non‐gradient structures. Consequently, the three‐layer gradient cathode achieves superior rate performance and reduced electrode polarization at high sulfur mass loadings of 4.5 and 6.0 mg cm −2 . Furthermore, the applicability and scalability of this design are demonstrated in a five‐layer gradient cathode architecture, achieving an impressive discharge specific capacity increase from 656 mAh g −1 (three‐layer gradient) to 1232 mAh g −1 at 1/20 C for ultra‐high sulfur loading of 7.5 mg cm −2 . This innovative gradient cathode design offers substantial advancements in understanding and overcoming Li‐ion transport limitations, paving the way toward practical, high‐energy‐density ASSLSBs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical and Industrial Engineering, Northeastern University, Boston, MA, 02115, USA.
- Neutron Scattering Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831, USA.
- School of Engineering, Brown University, Providence, RI, 02912, USA.
ORCID-Profile: Cheng Xu, Yuxuan Zhang, James Torres, Hongli Zhu
Förderung
- Office of Science in the Department of Energy
Zitieren
APA
Xu, C., Zhang, Y., Torres, J., Mijailovic, A. S., Halacoglu, S., Wang, J., Sheldon, B. W., & Zhu, H. (2026). Operando Neutron Imaging of Lithium Flux and Gradient Cathode Design for Enhanced Kinetics in High‐Loading All‐Solid‐State Li─S Batteries. Advanced Materials, 38(5). https://doi.org/10.1002/adma.202511553
Vancouver
Xu C, Zhang Y, Torres J, Mijailovic AS, Halacoglu S, Wang J, et al. Operando Neutron Imaging of Lithium Flux and Gradient Cathode Design for Enhanced Kinetics in High‐Loading All‐Solid‐State Li─S Batteries. Advanced Materials. 2026;38(5). doi:10.1002/adma.202511553
BibTeX
@article{Xu2026,
author = {Xu, Cheng and Zhang, Yuxuan and Torres, James and Mijailovic, Aleksandar S and Halacoglu, Selim and Wang, Jiwei and Sheldon, Brian W and Zhu, Hongli},
title = {Operando Neutron Imaging of Lithium Flux and Gradient Cathode Design for Enhanced Kinetics in High‐Loading All‐Solid‐State Li─S Batteries},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {5},
doi = {10.1002/adma.202511553}
}
EUVIMED