Oxygen Vacancy‐Abundant Molybdenum Dioxide Electrodes with Minimal Interfacial Charge‐Transfer Resistance for Ultrafast Filter Electrochemical Capacitors
Advanced Materials · 2025-11 · 37 (47)
DOI: 10.1002/adma.202510569 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, 2025-09. Verfasst von Shuhao Zhu und 10 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials Research, Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 62 Literaturangaben. Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation, Guangdong Provincial Key Laboratory of Thermal Management Engineering & Materials.
Abstract (Originalsprache)
Electrochemical Capacitors (ECs) are considered capable of replacing bulky and low‐capacitance aluminum electrolytic capacitors (AECs) in alternative‐current filtering, yet regrettably, they have been plagued by slow ion migration and sluggish electrical response. Non‐carbon‐based electrode materials, while exhibiting significantly higher electric double‐layer capacitance (EDLC) compared to carbon‐based electrodes, still face the challenge of relatively high interfacial charge transfer resistance ( R ct ) that needs to be overcome. Here, a charge‐transfer kinetics enhancement strategy is demonstrated by utilizing the lattice oxygen deficiency in molybdenum dioxide (MoO 2− x ) to increase metallic electrical conductivity and the number of active sites. This strategy substantially reduces the R ct , thereby upgrading the high‐frequency performance of ECs, featuring the first high‐performance and scalable metal oxide‐based ultrafast ECs. The ECs with aqueous electrolyte achieve a phase angle ( φ ) of −80° and a specific capacitance of 966.8 µF cm −2 (3.9 F cm −3 ) at 120 Hz, while the surface‐mountable capacitors incorporating NC@MoO 2− x and EMImBF 4 demonstrate a φ of −80.3° and super‐long cycle stability (1 400 000 cycles), surpassing commercial AECs in many key performance indexes. This approach aligns with modern embedded electronic component manufacturing processes, which is about to provide profound impact to the advancement of high‐performance miniaturized components and emerging electronic technologies.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Materials Research, Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China.
- Shenzhen Huasuan Technology Co., Ltd., Shenzhen, 518055, China.
ORCID-Profile: Cheng Yang
Förderung
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
- Guangdong Provincial Key Laboratory of Thermal Management Engineering & Materials
- Shenzhen Outstanding Talents Training Fund
- Shenzhen Geim Graphene Center
- Testing Technology Center of Materials and Devices
Zitieren
APA
Zhu, S., Cai, X., Zhu, H., Zhao, Y., Zhao, J., Li, S., Liu, Y., Wang, Z., Li, X., Kang, F., & Yang, C. (2025). Oxygen Vacancy‐Abundant Molybdenum Dioxide Electrodes with Minimal Interfacial Charge‐Transfer Resistance for Ultrafast Filter Electrochemical Capacitors. Advanced Materials, 37(47). https://doi.org/10.1002/adma.202510569
Vancouver
Zhu S, Cai X, Zhu H, Zhao Y, Zhao J, Li S, et al. Oxygen Vacancy‐Abundant Molybdenum Dioxide Electrodes with Minimal Interfacial Charge‐Transfer Resistance for Ultrafast Filter Electrochemical Capacitors. Advanced Materials. 2025;37(47). doi:10.1002/adma.202510569
BibTeX
@article{Zhu2025,
author = {Zhu, Shuhao and Cai, Xinlei and Zhu, Haojie and Zhao, Yunxiang and Zhao, Jianwei and Li, Shanlin and Liu, Yihang and Wang, Ziqiang and Li, Xiaolan and Kang, Feiyu and Yang, Cheng},
title = {Oxygen Vacancy‐Abundant Molybdenum Dioxide Electrodes with Minimal Interfacial Charge‐Transfer Resistance for Ultrafast Filter Electrochemical Capacitors},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {47},
doi = {10.1002/adma.202510569}
}
EUVIMED