Scalable Production of Highly‐Reliable Graphene‐Based Microchips
Advanced Materials · 2025-10 · 37 (43)
DOI: 10.1002/adma.202510501 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 14.08.2025. Verfasst von Wenwen Zheng und 13 weiteren Autor:innen. Beteiligte Einrichtung: Physical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST), Thuwal, 23955-6900, Saudi Arabia. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: King Abdullah University of Science and Technology, European Union's Horizon 2020 research and innovation programme, BMBF.
Abstract (Originalsprache)
Graphene is a gapless 2D material that could be used to fabricate superior electronic devices and circuits, particularly useful in the fields of telecommunication and sensing. While promising performance has been demonstrated at the laboratory scale, graphene integrated circuits at the wafer level suffer from poor reliability due to native defects, especially at interfaces with dielectrics and electrodes. Here, we show the fabrication of highly reliable graphene‐based microchips, containing transistors and frequency doublers, on 200 mm wafers through a multi‐project wafer tape‐out. Our transistors use multilayer hexagonal boron nitride (hBN) as gate dielectric, and they exhibit record performance in terms of reliability. In particular, our hBN/graphene transistors show ultra‐low hysteresis below 20 mV and negligible shifts of the on‐state current and the charge neutrality point even after 2100 cycles. The ultra‐stable response of our hBN/graphene transistors contrasts with that of devices using metal‐oxide gate dielectrics (HfO 2 , Al 2 O 3 ), which exhibit severe degradation after a few dozens of cycles. These results, consistent across multiple devices, show low variability and demonstrate a scalable process for mass production of graphene‐based microchips.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Physical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST), Thuwal, 23955-6900, Saudi Arabia.
- AIXTRON SE, Dornkaulstr. 2, 52134, Herzogenrath, Germany.
- Department of Materials Science and Engineering, National University of Singapore, 9 Engineering Drive 1, Building EA, Singapore, 117575, Singapore.
- Institute for Functional Intelligent Materials, National University of Singapore, 4 Science Drive 2, Building S9, Singapore, 117544, Singapore.
- Centre for Advanced 2D Materials (CA2DM), National University of Singapore, 6 Science Drive 2, Building S14, Singapore, 117546, Singapore.
ORCID-Profile: Wenwen Zheng, Mario Lanza
Förderung
- King Abdullah University of Science and Technology
- European Union's Horizon 2020 research and innovation programme
- BMBF
- Bundesministerium für Bildung und Forschung
Zitieren
APA
Zheng, W., Pazos, S., Yuan, Y., Zhu, K., Shen, Y., Ping, Y., Alharbi, O., Krotkus, S., Pasko, S., Mischke, J., Yengel, E., Henning, A., Kazzi, S. E., & Lanza, M. (2025). Scalable Production of Highly‐Reliable Graphene‐Based Microchips. Advanced Materials, 37(43). https://doi.org/10.1002/adma.202510501
Vancouver
Zheng W, Pazos S, Yuan Y, Zhu K, Shen Y, Ping Y, et al. Scalable Production of Highly‐Reliable Graphene‐Based Microchips. Advanced Materials. 2025;37(43). doi:10.1002/adma.202510501
BibTeX
@article{Zheng2025,
author = {Zheng, Wenwen and Pazos, Sebastian and Yuan, Yue and Zhu, Kaichen and Shen, Yaqing and Ping, Yue and Alharbi, Osamah and Krotkus, Simonas and Pasko, Sergej and Mischke, Jan and Yengel, Emre and Henning, Alex and Kazzi, Salim El and Lanza, Mario},
title = {Scalable Production of Highly‐Reliable Graphene‐Based Microchips},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {43},
doi = {10.1002/adma.202510501}
}
EUVIMED