Tailoring Graphite Interlayers with Electron‐Acceptor Bridges Raises Ion Diffusion Kinetics for Ultrafast Charging Batteries
Advanced Materials · 2025-12 · 37 (50)
DOI: 10.1002/adma.202509207 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 27.08.2025. Verfasst von Fei Wang und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, National University of Singapore, Singapore, 117574, Republic of Singapore. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Singapore NRF, Basic and Applied Basic Research Foundation of Guangdong Province.
Abstract (Originalsprache)
Sluggish solid‐state diffusion kinetics of lithium ions is among the primary bottlenecks limiting the fast‐charging performance of graphite anodes. Pre‐intercalating molecules in graphite interlayers can tune the valence π‐electrons, but there are few systematic studies in designing such structures by electron coupling to optimize the charge transfer kinetics. Herein, deliberately guided by simulations, the present study identifies and develops a class of electron‐acceptor aluminum chloride species for intercalation into graphite (AC‐G), aiming to accelerate lithium ions charge transfer to the intercalated graphite through the formation of electron‐acceptor bridges within the graphite interlayers. Consequently, the AC‐G achieves a two‐order‐of‐magnitude enhancement in lithium ions diffusion coefficient (5.85 × 10 −7 cm 2 s −1 ) compared to that in pristine graphite. It delivers stable cycling over 2000 cycles with a high areal capacity retention of 3.84 mAh cm −2 at 1C and maintains 500‐cycle stability at 5C. Furthermore, an Ah‐level pouch cell assembled with AC‐G and cathode achieves an energy density of 285 Wh kg −1 at 3C. The present work provides a new design strategy for graphite by introducing interlayer electron‐bridging structures, offering valuable insights for next‐generation fast‐charging lithium‐ion batteries
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Engineering, National University of Singapore, Singapore, 117574, Republic of Singapore.
- Hunan Province Key Laboratory for Advanced Carbon Materials and Applied Technology, College of Materials Science and Engineering, Hunan University, Changsha, 410082, China.
- Ji Hua Laboratory, Foshan, Guangdong, 528000, China.
- School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, Guangdong, 510006, China.
- National University of Singapore (Chongqing) Research Institute, Chongqing Liang Jiang New Area, Chongqing, 401120, China.
Förderung
- National Natural Science Foundation of China
- Singapore NRF
- Basic and Applied Basic Research Foundation of Guangdong Province
Zitieren
APA
Wang, F., Lu, A., Liu, Z., Zhang, W., Gao, Y., Zhao, Q., Sun, J., Zhang, C., Liu, Q., Liu, H., & Wang, J. (2025). Tailoring Graphite Interlayers with Electron‐Acceptor Bridges Raises Ion Diffusion Kinetics for Ultrafast Charging Batteries. Advanced Materials, 37(50). https://doi.org/10.1002/adma.202509207
Vancouver
Wang F, Lu A, Liu Z, Zhang W, Gao Y, Zhao Q, et al. Tailoring Graphite Interlayers with Electron‐Acceptor Bridges Raises Ion Diffusion Kinetics for Ultrafast Charging Batteries. Advanced Materials. 2025;37(50). doi:10.1002/adma.202509207
BibTeX
@article{Wang2025,
author = {Wang, Fei and Lu, Anbang and Liu, Zhendong and Zhang, Weidong and Gao, Yulin and Zhao, Qi and Sun, Jianguo and Zhang, Chengzhi and Liu, Quanbing and Liu, Hongbo and Wang, John},
title = {Tailoring Graphite Interlayers with Electron‐Acceptor Bridges Raises Ion Diffusion Kinetics for Ultrafast Charging Batteries},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {50},
doi = {10.1002/adma.202509207}
}
EUVIMED