A High‐entropy Antiperovskite Nitride Enables Efficient Anion Exchange Membrane Water Electrolysis
Advanced Materials · 2025-09 · 37 (38)
DOI: 10.1002/adma.202509042 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 23.06.2025. Verfasst von Jiaxi Zhang und 10 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Provincial Key Laboratory of Fuel Cell Technology, School of Chemistry and Chemical Engineering, South China University of Technology, Guan…. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Key Technologies R&D Program of Guangdong Province, Guangdong Basic and Applied Basic Research Foundation.
Abstract (Originalsprache)
Despite the availability of many (oxy)hydroxide‐based oxygen evolution reaction (OER) electrocatalysts with favorable intrinsic activity, few perform well in anion exchange membrane water electrolyzers (AEMWEs). Their poor electrical conductivity confines the OER to the boundary between the current collector and electrocatalyst, resulting in poor catalyst utilization. Herein, the use of highly conductive antiperovskite nitride is proposed as a platform to develop robust OER electrodes for AEMWEs with outstanding performance. By growing over nickel foam, high catalyst surface is realized. Under operation conditions, surface reconstruction leads to the formation of a thin layer of metal oxy‐hydroxide, which acts as the real catalyst while protecting the bulk nitride from further corrosion, in turn the conductive antiperovskite effectively improves the catalyst utilization due to efficient current collection. By further rational design of the antiperovskite with a high‐entropy composition capable of selective dissolution of elements, lattice oxygen participation in the OER catalysis is enhanced, resulting in boosted intrinsic activity. Specifically, FeZnNNiCoV shows a 108‐fold increase in OER specific activity compared to low‐entropy ZnNNiCo and ultra‐high stability at 1 A cm −2 over 1000 h. The corresponding AEMWE requires a potential of only 1.76 V to reach 1 A cm −2 , making it highly promising for practical applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Guangdong Provincial Key Laboratory of Fuel Cell Technology, School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou, 510641, China.
- School of Chemistry, South China Normal University, Guangzhou, 510006, China.
- Curtin Centre for Advanced Energy Materials and Technoligies, WA School of Mines: Minerals, Energy and Chemical Engineering (WASM-MECE), Curtin University, Perth, WA, 6102, Australia.
- National Energy Key Laboratory for New Hydrogen-Ammonia Energy Technologies, Foshan Xianhu Laboratory, Foshan, 528216, China.
ORCID-Profile: Jiaxi Zhang, Zhiming Cui
Förderung
- National Natural Science Foundation of China
- Key Technologies R&D Program of Guangdong Province
- Guangdong Basic and Applied Basic Research Foundation
- Basic and Applied Basic Research Foundation of Guangdong Province
Zitieren
APA
Zhang, J., Tu, Y., Xu, X., Ke, J., Zhang, L., Zhong, C., Zhang, Y., Du, L., Jiang, S. P., Shao, Z., & Cui, Z. (2025). A High‐entropy Antiperovskite Nitride Enables Efficient Anion Exchange Membrane Water Electrolysis. Advanced Materials, 37(38). https://doi.org/10.1002/adma.202509042
Vancouver
Zhang J, Tu Y, Xu X, Ke J, Zhang L, Zhong C, et al. A High‐entropy Antiperovskite Nitride Enables Efficient Anion Exchange Membrane Water Electrolysis. Advanced Materials. 2025;37(38). doi:10.1002/adma.202509042
BibTeX
@article{Zhang2025,
author = {Zhang, Jiaxi and Tu, Yuanhua and Xu, Xiaomin and Ke, Jun and Zhang, Longhai and Zhong, Chengzhi and Zhang, Yuwei and Du, Li and Jiang, San Ping and Shao, Zongping and Cui, Zhiming},
title = {A High‐entropy Antiperovskite Nitride Enables Efficient Anion Exchange Membrane Water Electrolysis},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {38},
doi = {10.1002/adma.202509042}
}
EUVIMED