Mechanically Robust and Ion‐Conductive Polyampholyte Elastomers via Dimeric Ionic Bonding
Advanced Materials · 2025-10 · 37 (40)
DOI: 10.1002/adma.202508670 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 30.07.2025. Verfasst von Taebin Kim und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Yonsei University, Seoul, 03722, Republic of Korea. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Foundation of Korea, Korean government, Nano & Material Technology Development Program through the National Research Foundation of Korea.
Abstract (Originalsprache)
The development of ionic materials with high ionic conductivity and mechanical strength is challenging. This study presents a novel synthetic strategy for the development of a mechanically robust and ionically conductive polyampholyte elastomer based on ionic dimers (IDs) with strong ionic bonds between imidazolium and sulfonate. Polymerization of ID monomers with a network that forms a cross‐linking moiety results in a novel polyampholyte ID elastomer (IDE). The addition of lithium (Li) salts in the IDE substantially enhances the ionic conductivity up to 0.82 mS cm −1 with a high Li + transference number ( t Li⁺ ) of 0.79. The mechanical properties of the IDE with Li salts are remarkable, with a tensile strength of 27.4 MPa and a Young's modulus of 211 MPa, outperforming previous polyampholyte elastomers. A resistive‐type iontronic sensor using the IDE exhibited excellent sensitivity (gauge factor = 2.92) and reliable cycle performance (≈400 cycles) under repetitive stress. The IDE serves as a polymer electrolyte in a pouch‐type full cell, showing stable capacity at a high current density of 1.0 C (corresponding to 4.0 mA cm −2 ) under ambient conditions (25 °C, 0.2 MPa). This synthetic strategy offers a new approach for designing ionic materials with high conductivity and mechanical strength.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Engineering, Yonsei University, Seoul, 03722, Republic of Korea.
- Department of Chemical and Biomolecular Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul, 03722, Republic of Korea.
- Department of Battery Engineering, Yonsei University, Seoul, 03722, Republic of Korea.
- Spin Convergence Research Center, Korea Institute of Science and Technology (KIST), Seoul, 02792, Republic of Korea.
ORCID-Profile: Sang-Young Lee, Cheolmin Park
Förderung
- National Research Foundation of Korea
- Korean government
- Nano & Material Technology Development Program through the National Research Foundation of Korea
- Ministry of Science and ICT
- Basic Science Research Program
- Ministry of Science and ICT, South Korea
Zitieren
APA
Kim, T., Oh, K. S., Oh, S., Jung, J. G., Kim, G., Kim, W., Kim, Y., Kim, J., Kang, H., Lee, S. Y., & Park, C. (2025). Mechanically Robust and Ion‐Conductive Polyampholyte Elastomers via Dimeric Ionic Bonding. Advanced Materials, 37(40). https://doi.org/10.1002/adma.202508670
Vancouver
Kim T, Oh KS, Oh S, Jung JG, Kim G, Kim W, et al. Mechanically Robust and Ion‐Conductive Polyampholyte Elastomers via Dimeric Ionic Bonding. Advanced Materials. 2025;37(40). doi:10.1002/adma.202508670
BibTeX
@article{Kim2025,
author = {Kim, Taebin and Oh, Kyeong-Seok and Oh, SeJung and Jung, Jong Gun and Kim, Gwanho and Kim, Woojoong and Kim, Yeonji and Kim, Jiwon and Kang, Hyunseo and Lee, Sang-Young and Park, Cheolmin},
title = {Mechanically Robust and Ion‐Conductive Polyampholyte Elastomers via Dimeric Ionic Bonding},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {40},
doi = {10.1002/adma.202508670}
}
EUVIMED