3D‐Printed Bioinspired Meta‐Structural Perovskite Catalysts for Dry Reforming of CH 4 and CO 2
Advanced Materials · 2025-11 · 37 (44)
DOI: 10.1002/adma.202508078 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 30.07.2025. Verfasst von Cunbao Huo und 11 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, No. 28 Xian Ning West Road, Xi'an, 710049, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation, Young Talent Fund of Xi'an Association for Science and Technology.
Abstract (Originalsprache)
Conventional packed‐bed catalysts suffer from single‐scale porosity, insufficient mechanical strength, and suboptimal mass transfer efficiency. Inspired by the fractal structure of the lung bronchi, a design and 3D printing method for gradient meta‐structural catalysts is proposed by integrating synthesized LaFe 0.5 Ni 0.5 O 3 (LFN) perovskite with pseudo‐boehmite, achieving ultralow pressure drop and high catalytic efficiency. Computational fluid dynamics and reaction simulations guide the design of uniform and gradient‐structured catalysts with hierarchical woodpile channels (0.5–3 mm). Compared with homogeneous catalysts, the gradient design theoretically exhibits 1.5‐fold and 1.1‐fold increases in flow velocity and hydrogen production, respectively. Meta‐structural catalysts are fabricated with gradient multi‐peak pore distribution (9.32 nm, 103.75 nm) by regionally modulating unit cell sizes and LFN content (11–35%) combined with the dehydroxylation of pseudo‐boehmite. 3D‐printed perovskite catalysts demonstrate a 78.7‐fold increase in specific surface area (102.26 m 2 g −1 ) and compressive strength of 8.48 MPa. In dry reforming of methane (DRM) tests, it achieves 82.13% CH 4 conversion, and 9.69 mmol g −1 syngas yield, outperforming conventional powder‐packed beds by 10% efficiency. This study achieves mass transfer and catalytic performance coupling by tuning gradient hierarchical pores and tailoring flow dynamics, offering a paradigm for robust, high‐efficiency catalyst design across diverse applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, No. 28 Xian Ning West Road, Xi'an, 710049, China.
- College of Chemical Engineering, Xi'an Jiaotong University, No. 28 Xian Ning West Road, Xi'an, 710049, China.
- Xi'an Taijin New Energy & Materials Sci-Tech Co., Ltd., No. 15 West Section of Xijin Road, Xi'an, 710021, China.
- Lanzhou Petrochemical Research Center, Petrochemical Research Institute, PetroChina Company Limited, No.1 Heshui North Road, Lanzhou, 730060, China.
ORCID-Profile: Xiaoyong Tian
Förderung
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
- Young Talent Fund of Xi'an Association for Science and Technology
Zitieren
APA
Huo, C., Wu, S., Zhang, R., Wu, Z., Tian, X., Tan, L., Li, K., Yang, Y., Wang, B., Hu, Z., Wu, L., & Li, D. (2025). 3D‐Printed Bioinspired Meta‐Structural Perovskite Catalysts for Dry Reforming of CH 4 and CO 2. Advanced Materials, 37(44). https://doi.org/10.1002/adma.202508078
Vancouver
Huo C, Wu S, Zhang R, Wu Z, Tian X, Tan L, et al. 3D‐Printed Bioinspired Meta‐Structural Perovskite Catalysts for Dry Reforming of CH 4 and CO 2. Advanced Materials. 2025;37(44). doi:10.1002/adma.202508078
BibTeX
@article{Huo2025,
author = {Huo, Cunbao and Wu, Shuwang and Zhang, Rongjiang and Wu, Zhiqiang and Tian, Xiaoyong and Tan, Lei and Li, Kexin and Yang, Yao and Wang, Baojie and Hu, Zhun and Wu, Lingling and Li, Dichen},
title = {3D‐Printed Bioinspired Meta‐Structural Perovskite Catalysts for Dry Reforming of CH 4 and CO 2},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {44},
doi = {10.1002/adma.202508078}
}
EUVIMED