Designing Co‐Free Medium‐Ni Layered Oxide Cathodes via Additional Li Substitution
Advanced Materials · 2025-10 · 37 (42)
DOI: 10.1002/adma.202507530 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 29.07.2025. Verfasst von Yilong Niu und 13 weiteren Autor:innen. Beteiligte Einrichtung: Beijing Key Laboratory of Theory and Technology for Advanced Batteries Materials, School of Materials Science and Engineering, Peking University, Bei…. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: New Energy Project for Electric Vehicles of the National Key R&D Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
High‐capacity cathode materials are requisite for constructing high‐energy‐density Li‐ion batteries. Although efforts are being concentrated on exploring ultra‐Ni‐rich layered oxides, the structural instability of these cathodes remains a hard nut to crack before reaching their practicality. Alternatively, raising the upper cutoff voltage of medium‐Ni oxides can equivalently increase the capacity, but it also devastates the structure. Here, a strategy is proposed to circumvent this dilemma by enriching the Li ions in medium‐Ni layered oxides, and meanwhile remaining Co‐free. Through surveying a range of compositions of Li 1+y Ni 1−3y Mn 2y O 2 (0.03≤ y≤0.15), a threshold for Li richness in this class of compounds is pinpointed, as represented by Li 1.12 Ni 0.64 Mn 0.24 O 2 , which is crucial to reach optimum capacity and cycling. This is delicately mediated by the proper amount of reversible anionic redox, as evidenced by electrochemistry and spectroscopy, that contributes to the structural stability even cycled to 4.5 V. We also found that the existence of additional Li ions in the lattice can effectively suppress the Li/Ni mixing, thereby weakening the necessity of Co in Ni‐based cathodes. As a result, Li 1.12 Ni 0.64 Mn 0.24 O 2 shows a capacity of ≈200 mA h g −1 that can be sustained for 100 cycles, which is further validated by an excellent long‐life full‐cell performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Beijing Key Laboratory of Theory and Technology for Advanced Batteries Materials, School of Materials Science and Engineering, Peking University, Beijing, 100871, P. R. China.
- Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, CA, 94720, USA.
- Spallation Neutron Source Science Center, Dongguan, 523803, P. R. China.
- School of Engineering, Westlake University, Hangzhou, Zhejiang, 310030, P. R. China.
ORCID-Profile: Yilong Niu, Biao Li
Förderung
- New Energy Project for Electric Vehicles of the National Key R&D Program of China
- National Natural Science Foundation of China
Zitieren
APA
Niu, Y., Zhuo, Z., Hao, J., Yang, T., Cui, T., Gao, C., Yu, Y., Jiao, J., Luo, T., Zhou, Y., Ren, H., Xiang, Y., He, L., & Li, B. (2025). Designing Co‐Free Medium‐Ni Layered Oxide Cathodes via Additional Li Substitution. Advanced Materials, 37(42). https://doi.org/10.1002/adma.202507530
Vancouver
Niu Y, Zhuo Z, Hao J, Yang T, Cui T, Gao C, et al. Designing Co‐Free Medium‐Ni Layered Oxide Cathodes via Additional Li Substitution. Advanced Materials. 2025;37(42). doi:10.1002/adma.202507530
BibTeX
@article{Niu2025,
author = {Niu, Yilong and Zhuo, Zengqing and Hao, Jiazheng and Yang, Tonghuan and Cui, Tianwei and Gao, Chuan and Yu, Yue and Jiao, Jiahao and Luo, Tie and Zhou, Yue and Ren, Hongjin and Xiang, Yuxuan and He, Lunhua and Li, Biao},
title = {Designing Co‐Free Medium‐Ni Layered Oxide Cathodes via Additional Li Substitution},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {42},
doi = {10.1002/adma.202507530}
}
EUVIMED