An Elastomeric Electrolyte Based on Lithium‐Ion‐Selective Transmembrane Transport for Solid‐State Lithium‐Sulfur Batteries
Advanced Materials · 2025-09 · 37 (35)
DOI: 10.1002/adma.202507331 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 16.06.2025. Verfasst von Yifan Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Shanghai Engineering Research Center of Hierarchical Nanomaterials, Shanghai Key Laboratory of Advanced Polymeric Materials, School of Materials Scie…. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Solid‐state lithium‐sulfur batteries (SSLSBs) exhibit advantages such as high specific energy, safety, and low cost, making them an ideal candidate for next‐generation batteries. However, the current mechanical and electrochemical properties of solid‐state electrolytes do not meet the requirements of the practical application of SSLSBs. Herein, a construction strategy of fiber‐network‐based elastomeric solid electrolytes (FESE) based on electrospinning‐induced phase separation is proposed. The FESE features a structure in which an elastomeric layer with Li + ‐selective permeability encapsulates a fibrous plastic crystal electrolyte (PCE). This structure originates from the phase separation and fiberization of a hydrogenated nitrile rubber (HNBR) stabilized emulsion, driven by electrostatic jetting. Subsequently, in situ polymerization of methoxy polyethylene glycol is performed within the battery to achieve void filling. Benefiting from the interconnected ion transport channels, the Li + ‐selectivity, and the conformal interface, the as‐prepared FESE electrolyte achieves a high room‐temperature ionic conductivity of 1.11 mS cm⁻¹ and a Li + transference number of 0.77. The as‐assembled SSLSB delivers a high initial discharge capacity (1188 mAh g −1 ), remarkable rate capability (356 mAh g −1 at 4C), and excellent cycling performance (71.2% capacity retention after 800 cycles). This research presents a constructive strategy for the elastomeric electrolytes for high‐performance solid‐state batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Shanghai Engineering Research Center of Hierarchical Nanomaterials, Shanghai Key Laboratory of Advanced Polymeric Materials, School of Materials Science and Engineering, East China University of Science and Technology,…
- Cell Development Department, SVOLT Energy Technology (Wuxi) Co., Ltd, Wuxi, 214000, China.
- Shanghai Engineering Research Center of Hierarchical Nanomaterials, School of Chemical Engineering, East China University of Science and Technology, Shanghai, 200237, China.
ORCID-Profile: Wenqiang Wang, Gengchao Wang
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhang, Y., Ding, C., Ding, J., Chen, J., Wang, W., Wang, G., & Li, C. (2025). An Elastomeric Electrolyte Based on Lithium‐Ion‐Selective Transmembrane Transport for Solid‐State Lithium‐Sulfur Batteries. Advanced Materials, 37(35). https://doi.org/10.1002/adma.202507331
Vancouver
Zhang Y, Ding C, Ding J, Chen J, Wang W, Wang G, et al. An Elastomeric Electrolyte Based on Lithium‐Ion‐Selective Transmembrane Transport for Solid‐State Lithium‐Sulfur Batteries. Advanced Materials. 2025;37(35). doi:10.1002/adma.202507331
BibTeX
@article{Zhang2025,
author = {Zhang, Yifan and Ding, Chao and Ding, Jianlong and Chen, Jin and Wang, Wenqiang and Wang, Gengchao and Li, Chunzhong},
title = {An Elastomeric Electrolyte Based on Lithium‐Ion‐Selective Transmembrane Transport for Solid‐State Lithium‐Sulfur Batteries},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {35},
doi = {10.1002/adma.202507331}
}
EUVIMED