Interface Design of Solid–Liquid Hybrid Electrodes for High‐Energy‐Density Flexible Lithium‐Ion Batteries
Advanced Materials · 2025-08 · 37 (32)
DOI: 10.1002/adma.202506911 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 22.05.2025. Verfasst von Wenyan Chen und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin, 150006, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Guangdong Basic and Applied Basic Research Foundation, Guangdong Provincial Key Laboratory of Energy Materials for Electric Power.
Abstract (Originalsprache)
The silicon microparticles (SiMPs) offer a promising solution for high‐energy‐density lithium‐ion battery systems. However, the inevitable volume expansion (>300%) of SiMPs during alloying often leads to particle breakage, interface rupture, and electrode separation, resulting in rapid capacity decay. Herein, an effective strategy is proposed for designing a novel solid–liquid hybrid electrode (Si@EGaSn) for high‐energy‐density flexible lithium‐ion batteries. The Si@EGaSn electrode has a liquid‐phase top layer containing SiMPs and a solid‐phase copper gallium alloy bottom layer. The top layer can not only electrically connect the fractured SiMPs, but also form a stable solid electrolyte interface during alloying processes. The bottom layer can firmly adhere the electrodes to the current collector. Consequently, the optimal Si@EGaSn electrode delivers a highly reversible capacity of 767.1 mAh g −1 at 0.5 A g −1 and a high capacity retention of >99% during 200 cycles. After loading the electrode into metallic textiles, the assembled high‐voltage pouch cell of NCM811//Si@EGaSn shows a high areal capacity of 3.2 mAh cm −2 , high volumetric energy density of 500 Wh L −1 and negligible capacity decay during 3000 flexing cycles at a small bending radius of 4.0 mm. This work provides a new electrode design approach to achieve high‐energy‐density flexible lithium‐ion batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin, 150006, China.
- Department of Materials Science and Engineering, School of Innovation and Entrepreneurship, Institute of Innovative Materials, Southern University of Science and Technology, Shenzhen, 518055, China.
- Dongguan Key Laboratory of Interdisciplinary Science for Advanced Materials and Large-Scale Scientific Facilities, School of Physical Sciences, Great Bay University, Dongguan, 523000, China.
- Research Institute of Materials Science, South China University of Technology, Guangzhou, 510640, China.
ORCID-Profile: Jian Chang
Förderung
- National Natural Science Foundation of China
- Guangdong Basic and Applied Basic Research Foundation
- Guangdong Provincial Key Laboratory of Energy Materials for Electric Power
- Research Team on Solar Metamaterials
- Guangdong Special Support Program
- High level of special funds
- Basic and Applied Basic Research Foundation of Guangdong Province
Zitieren
APA
Chen, W., Zhang, Z., Zhang, F., Wei, Z., Li, P., Wang, C., Gu, M., Deng, Y., & Chang, J. (2025). Interface Design of Solid–Liquid Hybrid Electrodes for High‐Energy‐Density Flexible Lithium‐Ion Batteries. Advanced Materials, 37(32). https://doi.org/10.1002/adma.202506911
Vancouver
Chen W, Zhang Z, Zhang F, Wei Z, Li P, Wang C, et al. Interface Design of Solid–Liquid Hybrid Electrodes for High‐Energy‐Density Flexible Lithium‐Ion Batteries. Advanced Materials. 2025;37(32). doi:10.1002/adma.202506911
BibTeX
@article{Chen2025,
author = {Chen, Wenyan and Zhang, Zhen and Zhang, Fangchang and Wei, Zhenyao and Li, Pengxian and Wang, Chaoyang and Gu, Meng and Deng, Yonghong and Chang, Jian},
title = {Interface Design of Solid–Liquid Hybrid Electrodes for High‐Energy‐Density Flexible Lithium‐Ion Batteries},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {32},
doi = {10.1002/adma.202506911}
}
EUVIMED