High‐Efficiency All‐Antimony Chalcogenide Tandem Solar Cells via Thermal‐Evaporated CdS Interface Engineering
Advanced Materials · 2025-10 · 37 (40)
DOI: 10.1002/adma.202506372 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 21.07.2025. Verfasst von Yingying Mo und 8 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education, School of Physics and Technology, Wuhan University, Wuhan, 430072, …. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 70 Literaturangaben. Gefördert von: Knowledge Innovation Special Project of Wuhan, National Natural Science Foundation of China, Nature Science Foundation of Hubei Province.
Abstract (Originalsprache)
Sb 2 S 3 , with an ideal bandgap of 1.7 eV, is a promising top‐cell absorber for tandem solar cells (TSCs). However, CdS electron transport layers (ETLs) prepared via chemical bath deposition suffer from poor crystallinity and high roughness, inducing interfacial defects, parasitic absorption, and severe carrier recombination, which hinder device performance. To address these challenges, this study employs thermal evaporation (TE) to fabricate CdS ETLs for semi‐transparent Sb 2 S 3 solar cells. The TE‐CdS films exhibit superior crystallinity, reduced roughness, and enhanced chemical purity. Sb 2 S 3 films deposited on TE‐CdS show preferential (hk1) orientation, improved crystallinity, optimized band alignment, and suppressed interfacial defects, facilitating efficient charge transport and light management. By incorporating a MoO 3 /ITO/Ag electrode, the semi‐transparent Sb 2 S 3 solar cell achieves a power conversion efficiency (PCE) of 7.46%, the highest reported efficiency for semi‐transparent Sb 2 S 3 solar cells. Furthermore, a four‐terminal (4T) TSC, formed by mechanically stacking Sb 2 S 3 and Sb 2 Se 3 cells, attains the champion PCE of 10.51% for all‐antimony chalcogenide‐based TSCs. This study provides critical insights into ETL engineering for high‐performance semi‐transparent Sb‐based solar cells and their tandem integration.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education, School of Physics and Technology, Wuhan University, Wuhan, 430072, China.
- Hefei National Research Centre for Physical Sciences at Microscale, School of Chemistry and Materials Science, University of Science and Technology of China, Hefei, 230026, China.
- Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, School of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan, 430205, China.
ORCID-Profile: Jianmin Li
Förderung
- Knowledge Innovation Special Project of Wuhan
- National Natural Science Foundation of China
- Nature Science Foundation of Hubei Province
Zitieren
APA
Mo, Y., Li, C., Yang, J., Wang, X., Hu, P., Chen, X., Chen, T., Xiao, X., & Li, J. (2025). High‐Efficiency All‐Antimony Chalcogenide Tandem Solar Cells via Thermal‐Evaporated CdS Interface Engineering. Advanced Materials, 37(40). https://doi.org/10.1002/adma.202506372
Vancouver
Mo Y, Li C, Yang J, Wang X, Hu P, Chen X, et al. High‐Efficiency All‐Antimony Chalcogenide Tandem Solar Cells via Thermal‐Evaporated CdS Interface Engineering. Advanced Materials. 2025;37(40). doi:10.1002/adma.202506372
BibTeX
@article{Mo2025,
author = {Mo, Yingying and Li, Chuang and Yang, Junjie and Wang, Xiaomin and Hu, Pu and Chen, Xueling and Chen, Tao and Xiao, Xudong and Li, Jianmin},
title = {High‐Efficiency All‐Antimony Chalcogenide Tandem Solar Cells via Thermal‐Evaporated CdS Interface Engineering},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {40},
doi = {10.1002/adma.202506372}
}
EUVIMED