Surface‐Engineering Cellulose Nanofibers via In Situ PEDOT Polymerization for Superior Thermoelectric Properties
Advanced Materials · 2025-09 · 37 (38)
DOI: 10.1002/adma.202506338 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 30.06.2025. Verfasst von Yuxuan Xia und 12 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemical Engineering and Low-Carbon Technology, Key Laboratory of Biomass Chemical Engineering of Ministry of Education, Coll…. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 71 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Scientific Research Innovation Capability Support Project for Young Faculty, Quzhou Science and Technology Project.
Abstract (Originalsprache)
Cellulose nanofibrils (CNFs) are abundant and possess exceptional mechanical strength, but their intrinsic electrical insulation limits their application in wearable electronics. In this study, a versatile methodology is presented to produce highly conductive and durable CNFs through electrostatic potential‐enhanced in situ polymerization of poly(3,4‐ethylenedioxythiophene) (PEDOT). Guided by molecular dynamics simulations, electrostatic interactions are controlled by tailoring the chain length of PEDOT, achieving homogeneous polymerization. Compared to conventional polymerization and blending methods, this approach prevented the self‐aggregation of PEDOT crystallites, which would otherwise localize charge carriers and hinder electrical transport, as confirmed by scanning Kelvin probe microscope (SKPM). These fibers can leverage nanocellulose's capillary effects to rearrange PEDOT crystallites, thereby boosting electrical conductivity by 5 orders of magnitude over suboptimal samples. The conductive nanocellulose paper achieves superior electrical conductivity (91 S cm −1 ) and durability, retaining 90% of electrical properties over 2000 bending cycles, 5000 abrasion tests, and prolonged wet‐heat aging, freezing, and UV aging, while also demonstrating stable thermoelectric performance with power factor exceeding 3.8 µW mK −2 and a promising device output of 46.6 nW. These findings advance the conventional notion that charge‐transporting nanocellulose can only be obtained by carbonization, graphitization, or physical blending with conductive components, which further boosts its potential for wearable applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Chemical Engineering and Low-Carbon Technology, Key Laboratory of Biomass Chemical Engineering of Ministry of Education, College of Chemical and Biological Engineering, Zhejiang University, Hangz…
- Zhejiang-Spain International Joint Laboratory of Advanced Material and Product Engineering, Institute of Zhejiang University-Quzhou, Quzhou, 324000, P. R. China.
- Institute of Wenzhou-Zhejiang University, 26 Fengnan Rd, Wenzhou, 325028, P. R. China.
- School of Chemistry and Chemical Engineering, Hefei University of Technology, Hefei, 230009, P. R. China.
- Department of Materials Science and Engineering, City University of Hong Kong, Hong Kong SAR, P. R. China.
- Ostia Technologies Limited, Manchester, M50, United Kingdom.
ORCID-Profile: Yuxuan Xia, Wen-Jun Wang, Xuan Yang, Khak Ho Lim
Förderung
- National Natural Science Foundation of China
- Scientific Research Innovation Capability Support Project for Young Faculty
- Quzhou Science and Technology Project
- Research Funds of the Institute of Zhejiang University-Quzhou
Zitieren
APA
Xia, Y., Li, J., Ji, Z., Zhou, K., Zhang, Y., Liu, Y., Tsang, S. W., Wong, K. W., Wang, Q., Wang, W. J., Cabot, A., Yang, X., & Lim, K. H. (2025). Surface‐Engineering Cellulose Nanofibers via In Situ PEDOT Polymerization for Superior Thermoelectric Properties. Advanced Materials, 37(38). https://doi.org/10.1002/adma.202506338
Vancouver
Xia Y, Li J, Ji Z, Zhou K, Zhang Y, Liu Y, et al. Surface‐Engineering Cellulose Nanofibers via In Situ PEDOT Polymerization for Superior Thermoelectric Properties. Advanced Materials. 2025;37(38). doi:10.1002/adma.202506338
BibTeX
@article{Xia2025,
author = {Xia, Yuxuan and Li, Jiahe and Ji, Ze and Zhou, Kexin and Zhang, Yu and Liu, Yu and Tsang, Sai Wing and Wong, Ka Wai and Wang, Qingyue and Wang, Wen-Jun and Cabot, Andreu and Yang, Xuan and Lim, Khak Ho},
title = {Surface‐Engineering Cellulose Nanofibers via In Situ PEDOT Polymerization for Superior Thermoelectric Properties},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {38},
doi = {10.1002/adma.202506338}
}
EUVIMED