EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Borate‐Water‐Based 3D‐Slime Interface Quasi‐Solid Electrolytes for Li‐ion Batteries

Yosuke Shiratori, Kenta Watanabe, Kengo Saito, Ryota Sato, Yukihiro Okuno, Shintaro Yasui iD

Advanced Materials · 2025-10 · 37 (41)

DOI: 10.1002/adma.202505649 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 09.07.2025. Verfasst von Yosuke Shiratori und 5 weiteren Autor:innen. Beteiligte Einrichtung: Analysis Technology Center, FUJIFILM Corporation, 210, Nakanuma, Minamiashigara, 250-0193, Japan. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: New Energy and Industrial Technology Development Organization, Japan Science and Technology Agency, Murata Science and Education Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of solid‐state batteries (SSBs) that do not use hazardous materials as electrolytes and are not flammable is progressing rapidly, however the production of sulfide‐based SSBs requires strict low‐dew‐point control due to their high reactivity with atmospheric moisture and the concern of generating hydrogen sulfide, and several issues remain in terms of the cost and recyclability. Thus, low‐cost facile materials and low‐CO 2 ‐emission processes are necessary. With regard to oxide‐type SSBs, which are attracting attention for their safety, there are issues with manufacturing suitability, as high‐temperature sintering of oxide solid electrolyte particles is required. A new quasi‐solid‐state (QSS) electrolyte with 3D‐ionic conduction and adhesive interfaces by combining amorphous Li 2 B 4 O 7 and water (3D‐Slime Interface Solid Electrolyte: 3D‐SLISE) is synthesized without stringent dew point control and sintering. Electrode and electrolyte slurries containing 3D‐SLISE are applied to current‐collecting foils in air, naturally dried, and used to construct battery laminates. 3D‐SLISE‐QSSBs (LiCoO 2 cathode/3D‐SLISE with 7 wt.% bound‐water/Li 4 Ti 5 O 12 or TiNb 2 O 7 anodes) maintain several hundred cycles of charge/discharge as a 2.35 V lithium‐ion battery. The 3D‐SLISE‐QSSB technology can promote the use of safe and low‐cost batteries, eliminate the need for a dry room during manufacturing, and enable direct recycling of active materials.

Schlagwörter

Stichwörter der Autor:innen

aqueous lithium‐ion batteriesboratesdirect recyclinghazardous materials‐freenon‐flammablequasi‐solid‐state electrolytesslime

Autor:innen und Institutionen

  • Analysis Technology Center, FUJIFILM Corporation, 210, Nakanuma, Minamiashigara, 250-0193, Japan.
  • Laboratory for Zero-Carbon Energy, Institute of Science Tokyo, 2-12-1, Ookayama, Meguro-ku, Tokyo, 152-8550, Japan.
  • Materials and Structures Laboratory, Institute of Science Tokyo, 4259, Nagatsuta-cho, Midori-ku, Yokohama, 226-8503, Japan.

ORCID-Profile: Shintaro Yasui

Förderung

  • New Energy and Industrial Technology Development Organization
  • Japan Science and Technology Agency
  • Murata Science and Education Foundation
  • Green Transformation Initiative, Institute of Science Tokyo
  • Design & Engineering by Joint Inverse Innovation for Materials Architecture
  • Japan Society for the Promotion of Science

Zitieren

APA

Shiratori, Y., Watanabe, K., Saito, K., Sato, R., Okuno, Y., & Yasui, S. (2025). Borate‐Water‐Based 3D‐Slime Interface Quasi‐Solid Electrolytes for Li‐ion Batteries. Advanced Materials, 37(41). https://doi.org/10.1002/adma.202505649

Vancouver

Shiratori Y, Watanabe K, Saito K, Sato R, Okuno Y, Yasui S. Borate‐Water‐Based 3D‐Slime Interface Quasi‐Solid Electrolytes for Li‐ion Batteries. Advanced Materials. 2025;37(41). doi:10.1002/adma.202505649

BibTeX
@article{Shiratori2025,
  author = {Shiratori, Yosuke and Watanabe, Kenta and Saito, Kengo and Sato, Ryota and Okuno, Yukihiro and Yasui, Shintaro},
  title = {Borate‐Water‐Based 3D‐Slime Interface Quasi‐Solid Electrolytes for Li‐ion Batteries},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {41},
  doi = {10.1002/adma.202505649}
}
Kostenlos starten →