EUVIMEDEUVIMED entdecken
Crossref

Enhanced Kinetics and Stability of Zn‐MnO 2 Batteries with a Multifunctional TiO 2 Coating

Tao Zhang, Tao Li, Yi Shen, Hexian Ma, Chenyu Wei, Jinghua Cai, Yang Xu, Yueyue Li, Xinji Dong, Shicong Zhang, Fuqiang Huang iD, Tianquan Lin iD

Advanced Materials · 2025-08 · 37 (34)

DOI: 10.1002/adma.202505082 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 10.06.2025. Verfasst von Tao Zhang und 11 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, 200240, P. R. …. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 62 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Shanghai Pilot Program for Basic Research-Shanghai Jiao Tong University, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Zinc‐ion batteries are a promising energy storage alternative, offering safety, cost‐effectiveness, and environment‐friendliness. MnO 2 is appealing for its high capacity and output voltage, but it suffers from slow kinetics and poor stability due to severe Mn dissolution during cycling. Here, the performance of MnO 2 is enhanced by coating it with a uniform TiO 2 nanolayer that incorporates oxygen vacancies. The TiO 2 ‐MnO 2 heterogeneous interface results in the formation of Ti─O─Mn bonds and a reduction in the interfacial valence state, thereby leading to the creation of an interface electron‐enriched region that facilitates faster electron and ion transport. This multifunctional TiO 2 coating not only promotes proton‐dominated electrochemical reactions and ion diffusion but also acts as a protective barrier, preventing Mn dissolution and buffering volume changes during cycling. Consequently, the MnO 2 @TiO 2 cathode demonstrates excellent specific capacity (299 mAh g −1 at 0.1 A g −1 ) and cycling stability, achieving 91.4% capacity retention after 2500 cycles at 1 A g −1 and 92.7% capacity retention after 600 cycles at a low current density of 0.2 A g −1 . These results outperform many previously reported manganese‐based cathodes, demonstrating MnO 2 @TiO 2 ’s potential as a high‐performance and durable cathode material for zinc‐ion batteries and advancing the development of efficient energy storage solutions.

Schlagwörter

Stichwörter der Autor:innen

TiO2‐MnO2 heterogeneous interfaceZn‐MnO2 batteriescycling stabilityelectrochemical kineticsmultifunctional TiO2 coating

Autor:innen und Institutionen

  • State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China.
  • Zhangjiang Institute for Advanced Study (ZIAS), Shanghai Jiao Tong University, Shanghai, 201210, P. R. China.
  • School of Materials Science and Engineering, University of Jinan, Jinan, 250022, P. R. China.

ORCID-Profile: Fuqiang Huang, Tianquan Lin

Förderung

  • National Key Research and Development Program of China
  • Shanghai Pilot Program for Basic Research-Shanghai Jiao Tong University
  • National Natural Science Foundation of China

Zitieren

APA

Zhang, T., Li, T., Shen, Y., Ma, H., Wei, C., Cai, J., Xu, Y., Li, Y., Dong, X., Zhang, S., Huang, F., & Lin, T. (2025). Enhanced Kinetics and Stability of Zn‐MnO 2 Batteries with a Multifunctional TiO 2 Coating. Advanced Materials, 37(34). https://doi.org/10.1002/adma.202505082

Vancouver

Zhang T, Li T, Shen Y, Ma H, Wei C, Cai J, et al. Enhanced Kinetics and Stability of Zn‐MnO 2 Batteries with a Multifunctional TiO 2 Coating. Advanced Materials. 2025;37(34). doi:10.1002/adma.202505082

BibTeX
@article{Zhang2025,
  author = {Zhang, Tao and Li, Tao and Shen, Yi and Ma, Hexian and Wei, Chenyu and Cai, Jinghua and Xu, Yang and Li, Yueyue and Dong, Xinji and Zhang, Shicong and Huang, Fuqiang and Lin, Tianquan},
  title = {Enhanced Kinetics and Stability of Zn‐MnO 2 Batteries with a Multifunctional TiO 2 Coating},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {34},
  doi = {10.1002/adma.202505082}
}
Kostenlos starten →