4D‐Printed Adaptive and Programmable Shape‐Morphing Batteries
Advanced Materials · 2025-07 · 37 (30)
DOI: 10.1002/adma.202505018 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 16.05.2025. Verfasst von Shaoshuai Ma und 11 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Tianjin University, Tianjin, 300350, China. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 61 Literaturangaben. Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, Joint Fund for Regional Innovation and Development of National Natural Science Foundation China.
Abstract (Originalsprache)
Shape‐morphing batteries that can reconfigure their shape to adapt to different tasks are highly desirable for emerging soft electronics in diverse fields. However, it is a challenging task to develop advanced shape‐morphing batteries with on‐demand programmability and adaptive responsiveness. Here, 4D‐printed programmable shape‐morphing batteries by sequentially direct‐ink‐writing of shape‐programmable liquid crystal elastomers (LCEs) and in‐situ covalent crosslinked flexible zinc‐ion microbatteries, where tough covalent bonding is built at the interface, are reported. The resulting shape‐morphing batteries exhibit controllable, reversible, and programmable shape‐morphing by controlling sophisticated molecular alignment of LCEs, which enables them to adaptively alter configurations to accommodate different functionalities. Importantly, diverse origami batteries with excellent spatiotemporal controllability are demonstrated by precisely designing active hinges to achieve adaptive transformations from folded to deployed configurations. The programmable shape‐morphing mechanisms of the batteries are revealed by finite element analyses. As a proof‐of‐concept illustration, adaptive shape‐morphing battery systems capable of interactive communication and controllable sensing are developed through the incorporation of an elaborate all‐MXene‐printed near‐field‐communication antenna, which can adaptively tune its deployment configuration according to variations in environmental humidity or dust content. This work brings new insights for the development of next‐generation shape‐morphing power sources, human‐machine interactive electronics, and swarm intelligence.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Tianjin University, Tianjin, 300350, China.
- Xi'an Rare Metal Materials Institute Co. Ltd, Xi'an, 710018, China.
- Beijing Royal School, Beijing, 102299, China.
- Binhai Industrial Research Institute, Tianjin University, Tianjin, 300452, China.
ORCID-Profile: Ling Wang
Förderung
- National Key R&D Program of China
- National Natural Science Foundation of China
- Joint Fund for Regional Innovation and Development of National Natural Science Foundation China
- China Postdoctoral Science Foundation
- Tianjin Science Fund for Distinguished Young Scholars
- National Key Research and Development Program of China
Zitieren
APA
Ma, S., Xue, P., Valenzuela, C., Liu, Y., Chen, Y., Feng, Y., Bi, R., Yang, X., Yang, Y., Sun, C., Xu, X., & Wang, L. (2025). 4D‐Printed Adaptive and Programmable Shape‐Morphing Batteries. Advanced Materials, 37(30). https://doi.org/10.1002/adma.202505018
Vancouver
Ma S, Xue P, Valenzuela C, Liu Y, Chen Y, Feng Y, et al. 4D‐Printed Adaptive and Programmable Shape‐Morphing Batteries. Advanced Materials. 2025;37(30). doi:10.1002/adma.202505018
BibTeX
@article{Ma2025,
author = {Ma, Shaoshuai and Xue, Pan and Valenzuela, Cristian and Liu, Yuan and Chen, Yuanhao and Feng, Yufan and Bi, Ran and Yang, Xinnuo and Yang, Yanzhao and Sun, CaiXia and Xu, Xinhua and Wang, Ling},
title = {4D‐Printed Adaptive and Programmable Shape‐Morphing Batteries},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {30},
doi = {10.1002/adma.202505018}
}
EUVIMED