In Situ Engineering of Grain Boundary Phase toward Superior Thermoelectric Performance in Mg 3 (Sb,Bi) 2
Advanced Materials · 2025-07 · 37 (28)
DOI: 10.1002/adma.202503665 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 22.04.2025. Verfasst von Jing-Wei Li und 10 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of New Ceramic Materials, School of Materials Science and Engineering, Tsinghua University, Beijing, 100084, China. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: Basic Science Center Project of National Natural Science Foundation of China, National Key R&D Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
As a promising thermoelectric material for electronic cooling and power generation, Mg 3 (Sb,Bi) 2 has received extensive attention. Despite efforts to enhance its performance through composite modulation, challenges such as secondary phase refinement, dispersion, and interfacial mismatch, particularly at grain boundaries, remain critical. In this work, by incorporating TiO 2‐n into the Mg 3 (Sb,Bi) 2 ‐based matrix, the grain boundary phases are in situ engineered, yielding a superior figure of merit ( zT) exceeding 2 at 798 K. The electrical conductivity is significantly enhanced with only slight changes to the Seebeck coefficient over the entire temperature range, mainly due to the contribution to carrier concentration and mobility from the newly generated Ti 3 Sb at grain boundaries. Benefiting from the remarkably enhanced power factor and the diminished lattice thermal conductivity, the zT value shows an overall increase within the temperature range of 300–798 K, leading to a considerable conversion efficiency of 15% for the single‐leg device.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of New Ceramic Materials, School of Materials Science and Engineering, Tsinghua University, Beijing, 100084, China.
- CAS Key Laboratory of Standardization and Measurement for Nanotechnology, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing, 100190, China.
ORCID-Profile: Jing-Feng Li
Förderung
- Basic Science Center Project of National Natural Science Foundation of China
- National Key R&D Program of China
- National Natural Science Foundation of China
- Shuimu Tsinghua Scholar Program
- National Key Research and Development Program of China
Zitieren
APA
Li, J. W., Gao, H., Han, Z., Yu, J., Zhuang, H. L., Chen, L., Li, H., Jiang, Y., Wang, Z., Zheng, Q., & Li, J. F. (2025). In Situ Engineering of Grain Boundary Phase toward Superior Thermoelectric Performance in Mg 3 (Sb,Bi) 2. Advanced Materials, 37(28). https://doi.org/10.1002/adma.202503665
Vancouver
Li JW, Gao H, Han Z, Yu J, Zhuang HL, Chen L, et al. In Situ Engineering of Grain Boundary Phase toward Superior Thermoelectric Performance in Mg 3 (Sb,Bi) 2. Advanced Materials. 2025;37(28). doi:10.1002/adma.202503665
BibTeX
@article{Li2025,
author = {Li, Jing-Wei and Gao, Hanbin and Han, Zhanran and Yu, Jincheng and Zhuang, Hua-Lu and Chen, Lu and Li, Hezhang and Jiang, Yilin and Wang, Zhengqin and Zheng, Qiang and Li, Jing-Feng},
title = {In Situ Engineering of Grain Boundary Phase toward Superior Thermoelectric Performance in Mg 3 (Sb,Bi) 2},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {28},
doi = {10.1002/adma.202503665}
}
EUVIMED