EUVIMEDEUVIMED entdecken
Crossref

Pushing the Limits: Maximizing Energy Density in Silicon Sulfide Solid‐State Batteries

Chanho Kim, Yuanshun Li, Inyoung Jang, Wenda Wu, Yi-Feng Su, Harry M Meyer, Jong Keum, Jagjit Nanda, Guang Yang iD

Advanced Materials · 2025-07 · 37 (27)

DOI: 10.1002/adma.202502300 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 27.05.2025. Verfasst von Chanho Kim und 8 weiteren Autor:innen. Beteiligte Einrichtung: Chemical Sciences Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831, USA. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 67 Literaturangaben. Gefördert von: UTBattelle, LLC under Contract No, Oak Ridge National Laboratory, under the CNMS user program, Office of Energy Efficiency and Renewable Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For the first time, we demonstrate a silicon solid‐state battery (SSB) architecture that achieves >400 Wh kg −1 , approaching the theoretical limit for silicon‐based SSBs. This configuration features a 99.9 wt% micro‐Si, a thin sulfide solid electrolyte (SSE), and a high‐loading NMC811. Key to these results is strategically selecting and evaluating the processing techniques, whether wet or dry, for the negative electrode, positive electrode and thin sheet‐type SSE. Excessive lithium incorporation into the silicon host, beyond the Li 3.75 +Si phase to form a LiSi composite, is essential to match the high capacity of the positive electrode. This SSB achieves over 1000 cycles for a 2 mAh cm −2 with ≈80% capacity retention and 94% capacity retention for 3 mAh cm −2 over 500 cycles at 25 °C. Post analysis identifies the primary capacity decay mechanisms as oxidation at the NMC/SSE interface and structural disruptions within NMC. Meanwhile, the Si electrode maintains a robust solid‐electrolyte interphase layer, minimizing capacity decay. This study highlights the necessity for improved NMC coatings, lattice oxygen stabilization, and a durable positive electrode‐electrolyte interface to improve the long‐term stability of SSBs. Strategies leading to a single‐layer pouch cell SSB exceeding 400 Wh kg −1 are developed.

Schlagwörter

Stichwörter der Autor:innen

NMC coatingall‐solid‐state batterieshigh energy densitysheet‐type electrolytesulfide electrolyte

Autor:innen und Institutionen

  • Chemical Sciences Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831, USA.
  • Department of Chemical and Biomolecular Engineering, University of Tennessee Knoxville, Knoxville, TN, 37996, USA.
  • School of Chemical & Biomolecular Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA.
  • Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831, USA.
  • Center for Nanophase Materials Sciences, Oak Ridge National Laboratory, Oak Ridge, TN, 37830, USA.
  • Neutron Scattering Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37830, USA.

ORCID-Profile: Guang Yang

Förderung

  • UTBattelle, LLC under Contract No
  • Oak Ridge National Laboratory, under the CNMS user program
  • Office of Energy Efficiency and Renewable Energy
  • Vehicle Technologies Office (VTO)

Zitieren

APA

Kim, C., Li, Y., Jang, I., Wu, W., Su, Y. F., Meyer, H. M., Keum, J., Nanda, J., & Yang, G. (2025). Pushing the Limits: Maximizing Energy Density in Silicon Sulfide Solid‐State Batteries. Advanced Materials, 37(27). https://doi.org/10.1002/adma.202502300

Vancouver

Kim C, Li Y, Jang I, Wu W, Su YF, Meyer HM, et al. Pushing the Limits: Maximizing Energy Density in Silicon Sulfide Solid‐State Batteries. Advanced Materials. 2025;37(27). doi:10.1002/adma.202502300

BibTeX
@article{Kim2025,
  author = {Kim, Chanho and Li, Yuanshun and Jang, Inyoung and Wu, Wenda and Su, Yi-Feng and Meyer, Harry M and Keum, Jong and Nanda, Jagjit and Yang, Guang},
  title = {Pushing the Limits: Maximizing Energy Density in Silicon Sulfide Solid‐State Batteries},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {27},
  doi = {10.1002/adma.202502300}
}
Kostenlos starten →