Lead Derivative‐Based Precursor Engineering Enables Halogen‐Uniform Perovskite Solar Cells with Enhanced Stability and Mechanical Tolerance
Advanced Materials · 2025-06 · 37 (24)
DOI: 10.1002/adma.202502277 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 24.04.2025. Verfasst von Yaochang Yue und 11 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Bioinspired Interfacial Materials Science, Bioinspired Science Innovation Center, Hangzhou International Innovation Institute…. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Strategic Priority Research Program of the Chinese Academy of Sciences.
Abstract (Originalsprache)
Perovskite solar cells (PSCs) with supreme opto‐electrical properties and solution‐processability have attracted tremendous interest. To realize state‐of‐the‐art efficiencies in PSCs, delicate control of bandgap ( E g ) is required, which generally involves using mixed halogens. This, however, can result in unfavorable phase segregation to negatively influence on the target efficiency and long‐term stability. Herein, a viable precursor method is demonstrated for preparing halide‐uniform perovskites based on lead derivatives of nPbI 2 :1PbXA. It is found that nPbI 2 :1PbXA enables tuning the bonding preference and strength between PbI 2 and PbBr 2 in the precursor, leading to generating stable ‐I‐Br‐I‐Br‐ fragments, which eventually minimizes halide segregation in the perovskite. The precursor approach have been applied to a series of wide‐bandgap mixed halide perovskites, achieving boosted efficiencies of 21.3% and 20.3% in CsPbI 2.8 Br 0.2 (bandgap of 1.74 eV) and Cs 0.2 FA 0.8 I 1.9 Br 1.1 (bandgap of 1.77 eV) based solar cells. Interestingly, the connection between the modified halide homogeneity and mechanical tolerance is found: the better the uniformity in the halide distribution, the higher the mechanical resistance of the perovskite to compressive or bending forces. The solar cells with modified halogen uniformity exhibit impressive long‐term stability, with the retention of >90% of the initial efficiencies after 1500 h of continuous illumination under maximum power point tracking.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Bioinspired Interfacial Materials Science, Bioinspired Science Innovation Center, Hangzhou International Innovation Institute, Beihang University, Hangzhou, 311115, P. R. China.
- School of Chemistry, Beijing Advanced Innovation Center for Biomedical Engineering, Beihang University, Beijing, Shandong, 100191, China.
- CAS Key Laboratory of Nanosystem and Hierarchical Fabrication, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing, 100190, China.
- School of Science, China University of Geosciences Beijing, Beijing, Shandong, 100083, China.
- School of Materials Science and Engineering, China University of Petroleum (East China), Qingdao, Shandong, 266580, China.
ORCID-Profile: Huiqiong Zhou, Yuan Zhang
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
- Strategic Priority Research Program of the Chinese Academy of Sciences
- Fundamental Research Funds for the Central Universities
- CAS-CSIRO Partnership Joint Project
- Zhongke Technology Achievement Transfer and Transformation Center of Henan Province
Zitieren
APA
Yue, Y., Zhang, W., Yang, R., Wang, Y., Bian, X., Qu, C., Yue, S., Li, S., Shi, W., Li, Y., Zhou, H., & Zhang, Y. (2025). Lead Derivative‐Based Precursor Engineering Enables Halogen‐Uniform Perovskite Solar Cells with Enhanced Stability and Mechanical Tolerance. Advanced Materials, 37(24). https://doi.org/10.1002/adma.202502277
Vancouver
Yue Y, Zhang W, Yang R, Wang Y, Bian X, Qu C, et al. Lead Derivative‐Based Precursor Engineering Enables Halogen‐Uniform Perovskite Solar Cells with Enhanced Stability and Mechanical Tolerance. Advanced Materials. 2025;37(24). doi:10.1002/adma.202502277
BibTeX
@article{Yue2025,
author = {Yue, Yaochang and Zhang, Weichao and Yang, Rongshen and Wang, Yongqing and Bian, Xin and Qu, Chao and Yue, Shengli and Li, Shilin and Shi, Wanfei and Li, Yanxun and Zhou, Huiqiong and Zhang, Yuan},
title = {Lead Derivative‐Based Precursor Engineering Enables Halogen‐Uniform Perovskite Solar Cells with Enhanced Stability and Mechanical Tolerance},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {24},
doi = {10.1002/adma.202502277}
}
EUVIMED